JVC XL-V184BK Service Manual page 21

XL-V184BK
XL-V284BK
(5) Front panel assembly removal
1. Do the (1) (3).
2 Remove the 3screw © on the bottom of the
front panel.
3 Remove the connectorJ202,P105,P301.
4 Remove front panel assembly. ,
(6) CD Main PCB(ENN-427-2) removal
1. De t h e ( l ) (2).
2. Remove the conector J202,P301.107 and
P102,P103,P104.
3. Remove the screw© and Sscrews © .
4. Remove the Main PCB
® J202
•
P301 P I 03
D
P104
P I 07
, FNN-477-?
Fig 5 Bottom view Fig 6 Top view
(7) Front PCB(ENN-427-3~5) removal
1. De the (1)(3)(5).
2. Remove the Front panel ass'y-
3. Remove the 14 screws ® .
4. Remove the Front PCB.
(8) InstallingCD mecha. tray
1. Insert the CDmecha.tray after checking that the
traverse mecha.is slanting(See Fig8).
2. K i t is up mode.press the cam plate until it stops
so that the traverse mech.slants.(See an arrow in
the foUowing figure.)
(R) ® ©
®
@
@
©
Cam plate
© © ©
© © ©
Traberse mecha down mode CD tray
Fig 7 Front PCB view
Traberse mecha
Fig 8
SBST3020Z © . . . SBSG3008M
. . . SBST3006M © .. SDSF2608Z
(No. 20503) 1-21