Mains Unit; Power Supply Unit; Cassette Deck - Revox C115 Operating And Service Instructions

2.4 Electronic modules
For replacing electronic modules, open the recorder as
described in Section 2.2.1.
For removing the front unit, proceed according to Section
2.2.2.
2.4.1 Mains Unit
Caution: Pull out the AC power plug before you re-
move the mains unit.
1. Detach connector J 4 (1) on the power supply unit.
2. Remove the acrylic glass cover by pressing the
clamping pins together.
3. Detach the ground connection (2) on the side panel
and the two connectors (3) on the power switch.
4. Unfasten three screws on the back of the chassis,
unfasten the two (4) of the power transformer and re-
move the mains unit.
1.4.2 Power supply Unit
1. Detach the following connectors:
- J 1 ofthe mains unit
- J3of the audio board
~ J4of the front unit
- J2of the front unit
- J1/J2 of the IN/OUT unit
- MP7 on the cassette deck
2. Unfasten four screws (1) and remove the circuit
board.