Disassembly; Housing; Front Unit - Revox C115 Operating And Service Instructions

REVOX®
C115
2.2 Disassembly
2.2.1 Housing
1. Unfasten two screws (1) on the side panel and three
screws (2) on the back.
Lift the cover and pull it off toward the back.
2.2.2 Front Unit
1. For removing the front unit, the following connectors
must be detached:
J6 on the power supply unit
J 2 on the power supply unit —
MP 7 on the cassette deck
WU 01 on the cassette deck
JJ 31 on the audio board
JK 31 on the audio board
JU 34 on the audio board
Ground screw on the audio board
. Unfasten three screws (1) on the front trim strip and
remove the strip.
. Unfasten four screws (2) on the front unit.
. Pull the front unit evenly upward (approx. ¥2 cm / 1%") un-
til it disengages from the lower retainer.
. Carefully move the front unit toward the front and set
it on a piece of cotton cloth.
J2
J6
MP7
WUO01