Cassette Deck Assembly; Tape Guide Rollers; Soundheads - Revox C115 Operating And Service Instructions

E 10 C115
2.2.3 Cassette deck assembly
1.
2.
2.3
Detach the connector MP 5 to the front unit.
Press the cassette eject button and lift off the cas-
sette deck trim strip.
. Unfasten the two screws (1) from the lever mecha-
nism and remove the latter.
. Unfasten the four screws (2) of the two mounting
flanges (do not lose the washers).
. The cassette deck and the cassette compartment can
now be removed as a complete unit.
. To detach the cassette compartment from the deck,
unfasten the four screws (3), remove the mounting
flanges, and carefully lift out the cassette deck.
. By reassembling, make shure that the cassette com-
partment fits symmetrically the front pannel opening.
Cassette deck mechanism
2.3.1 Tape guide rollers
1 Fixing and adjusting nut of the left-hand tape guide
roller
Fixing screw of the right-hand tape guide roller
Fixing and adjusting screw of the right-hand tape
guide roller
2.3.2 Soundheads
4
Two fixing screws of the record/reproduce head and
the swivel plate.
Three adjusting screws for REC/PB head height and
parallel alignment
Azimuth adjustment screw
Fixing screw for the erase head
REVOX®