Radio Connection - Grundfos MI 301 Installation And Operating Instructions Manual

4.1.1.1 Pairing in Grundfos GO Remote
To use the MI 301 with your smartphone, you must first pair them.
1. Open the main menu in the upper left corner of Grundfos GO
Remote.
2. For iOS smartphones, select Remote > Connect and follow on-
screen instructions.
3. For Android smartphones, select Settings > Remote > Pair
with MI and follow on-screen instructions.
4.1.2 Pairing in Grundfos GO
To use the MI 301 with your smartphone, you must first pair them in
the Grundfos GO app.
1. Open the Grundfos GO app, and select the Remote tab.
2. Select Press to connect.
3. Select MI301 in the lower right corner.
4. Press Connect and follow the on-screen instructions.
4.1.3 Connecting to Grundfos GO or GO Remote
Before connecting the product, the Grundfos GO or GO Remote
app must be downloaded to your smartphone. The app is free of
charge and available for iOS and Android smartphones.
1. Open Grundfos GO or GO Remote on your smartphone. Make
sure that Bluetooth is enabled.
Make sure that your smartphone and the MI 301 are charged.
Your smartphone and the MI 301 must be within range of each
other to establish Bluetooth connection.
2. Switch on the MI 301 by pressing its power button. The indicator
light starts flashing blue, indicating that the MI 301 is ready for
connection.
3. Press the connect icon in the app.
4. The blue LED is flashing until your smartphone is connected.
Once the connection is established, the LED starts flashing
green.
5. The MI 301 is now ready to establish a connection to a
Grundfos product. Keep the MI 301 within range of the Grundfos
product you want to connect to.

4.2 Radio connection

Radio - List and Radio - Connect are methods for radio
communication between Grundfos GO Remote and a Grundfos
product.
Check the section concerning supported Grundfos products to see
if your Grundfos product is supported.
Use Radio - List for products that are difficult to access physically,
or for a quick status overview. You must unlock the Grundfos
product when you connect to it for the first time. A padlock shows
whether the product is locked or unlocked.
Use Radio - Connect for quick and direct access to the product.
The Grundfos product is locked.
The Grundfos product is unlocked.
Related information
2.4 Supported Grundfos products
4. Wireless connection
4.1.1 Grundfos GO Remote
4.2.1.1 Connecting to a product using Radio - List
4.2.1.2 Connecting to a product using Radio - Connect
6.3 The MI 301 cannot connect via radio
8
4.2.1 Connecting to a product using Grundfos GO Remote
4.2.1.1 Connecting to a product using Radio - List
Follow the procedure below to unlock and connect to a product:
1. Press List next to Radio.
2. All products within radio range are listed. It may take some time
to scan for all products.
3. The list shows the product name, pump status, signal strength
and whether the product is locked or unlocked.
4. Use the wink command to identify the product you have
selected. When you press the symbol, an indicator light starts
flashing on the product. See the section concerning signaling
communication with remote control. Press the symbol again to
stop the wink.
Wink symbol
5. Press the product name to connect to the product.
6. If the product is locked, press OK or a dedicated connection
button on the product.
7. The data is loading. It may take some time.
8. Connection has been established, and Grundfos GO Remote
shows the product dashboard.
9. Press Disconnect to disconnect the product and connect to
another one.
Related information
4.2 Radio connection
4.2.1.2 Connecting to a product using Radio - Connect
Follow the procedure below to establish connection:
1. Press Connect next to Radio.
2. The indicator light in the centre of the Grundfos Eye is flashing
on all supported products within range. Press OK or a dedicated
connection button on the product you want to connect to.
3. The data is loading. It may take some time.
4. A connection is established, and Grundfos GO Remote shows
the product dashboard.
5. Press Disconnect to disconnect the product and connect to
another one.
Related information
4.2 Radio connection
4.2.2 Connecting to a product using radio in Grundfos GO
Follow the procedure below to establish connection:
1. Press CONNECT.
Grundfos GO automatically searches for products within range.
2. Press CONNECT next to the product you want to connect to.
• Press the connect button on the product you want to connect
to. The button differs from product to product.
• Select Use pairing code, enter the Connection code, and
press CONNECT.
The Connection code can be found on the Settings page of
the product.
3. Connection is established.