Fisher & Paykel DW24U6I User Manual page 29

FAULT
CODES AND
DESCRIPTIONS
F30
Flooding
F40
F50
A60
A70
Temperature sensing
A80
Turbidity sensing
F90
(DW24U6I only)
FA0
FCO
(DW24U6I only)
If the dishwasher still will not work, or if it displays a fault code not listed here
Touch twice to clear the fault.
1
Touch and hold
2
Open door to turn the dishwasher back on.
3
If the dishwasher still does not function and/or the problem persists, disconnect
the dishwasher from the power supply, turn the water supply off, then contact
Fisher & Paykel Customer Care with the fault code information.
FAULT CODES
POSSIBLE CAUSES
Flood switch activated
Water flow error
Electronics error
Water temperature
error
Alarm error
Alarm error
Data/electronics error
Electronics/power
supply error
Motor fault
again to turn the dishwasher off and wait a few minutes.
WHAT TO DO
Turn the dishwasher OFF and ON again.
If fault persists, turn water off and
disconnect the dishwasher from the power
supply. Call Customer Care.
Switch dishwasher OFF and ON again.
If fault persists call Customer Care.
Switch dishwasher OFF and ON again.
If fault persists call Customer Care.
Switch dishwasher OFF and ON again.
If fault persists call Customer Care.
Switch OFF and ON again.
If fault persists call Customer Care.
Switch OFF and ON again.
If fault persists call Customer Care.
Switch dishwasher OFF and ON again.
If fault persists call Customer Care.
Switch dishwasher OFF and ON again.
If fault persists call Customer Care.
Switch dishwasher OFF at the power supply.
Wait a few moments and switch ON again.
If fault persists, turn water off and disconnect
from the power supply. Call Customer Care.
EN
27