Fisher & Paykel DW24U6I User Manual page 27

Cleaning the spray arms
Limescale and food particles in the wash water can block the holes in the spray arms
and the arm mountings. Clean these parts about once a month, or more often should
the need arise.
Cleaning the upper spray arm/head
Do not remove the upper spray arm for cleaning. Clean with a small plastic-bristled
brush, or if heavily soiled or blocked use a dishwasher cleaner/descaler following the
manufacturer's instructions.
Cleaning the centre spray arm
To remove the centre spray arm, carefully unscrew its locking nut.
z z
Rinse the spray arm thoroughly under running water, then refit.
z z
IMPORTANT!
Make sure you twist the locking nut on the centre spray arm firmly back on the water
z z
supply tube.
Check that the centre spray arm is firmly locked in place and rotates freely.
z z
Cleaning the lower spray arm
To remove the lower spray arm, simply lift the spray arm off its mounting.
z z
Rinse the spray arm thoroughly under running water, then refit it on its mounting.
z z
CARE AND CLEANING
Lower spray arm
EN
Water supply tube
Locking nut
Centre spray arm
25