Table of Contents
Advertisement
How do I know if there is a problem?
Your oven will beep and an alert will show in the display.
What to do
First try to fix the issue and clear the alert according to the instructions onscreen or the
steps in the following table.
Do not turn the oven off at the wall unless it is completely cool. Turning off the power while
the oven is too hot may damage the oven and its surrounding cabinetry.
If the problem persists
1 Note down the fault code.
2 Contact Customer Care or a Fisher & Paykel trained and supported service technician.
Refer to the Service and Warranty booklet for contact details.
If the fault code has disappeared, the fault has been reset and you can continue to use
your oven.
FAULT CODE
A1
A5
F
+ number
30
POSSIBLE CAUSE
The oven has
overheated.
Microwave system has
overheated.
Technical fault.
FAULT CODES
WHAT TO DO
•
Allow the oven to cool down.
•
After the oven has cooled and the door is unlocked,
power down the oven before turning it back on.
•
You can now use the oven.
•
Allow the oven to cool down.
•
After the oven has cooled, power down the oven before
turning it back on.
•
You can now use the oven.
•
Note down the alert code.
•
Wait until the cooling fans have stopped and the oven
has completely cooled down.
•
Turn the power to the oven off at the wall.
•
Contact a Fisher & Paykel trained and supported service
technician or Customer Care.
Advertisement
Table of Contents
