Table of Contents
Advertisement
PROBLEM
The oven does not work
The oven does not work
but the screen is on
The lights do not come
on when I open the
oven door
The oven controls
are unresponsive
The oven is not heating
A glass pane in the
oven door has cracked,
chipped, or shattered
I can feel hot air blowing
out of the vents after I
have turned the oven off
The oven fan comes
on when I select a
function that does not
use a fan (eg BAKE or
CLASSIC BAKE)
The oven cancels
automatic cooking when
I try to adjust the clock
setting
28
TROUBLESHOOTING
POSSIBLE CAUSES
No power.
The oven is in Demo Mode.
The oven light bulb(s) have blown.
The oven light has been turned off.
The control panel is locked.
The door is not properly closed
or it is opened too frequently
during cooking.
Incorrect cleaning or the edge
of the glass hitting against
something.
This is normal.
This is normal.
The fan comes on while the oven
is preheating. It may turn off
when the oven has reached the
set temperature.
The oven was set for automatic
cooking when you were trying to
adjust the clock setting.
WHAT TO DO
Check that the mains power
supply (wall switch) is turned on,
the fuse has not tripped and there is
no power outage in your area.
Call Customer Care.
Call Customer Care.
Go to the menu in the top
left corner of the screen and
select LIGHT.
Touch and hold the screen
to unlock.
The heating elements are
disabled while the door is open.
Make sure the door is properly
closed and avoid opening it
frequently during cooking.
You must NOT use the oven.
Contact a Fisher & Paykel trained
and supported service technician or
Customer Care
For safety reasons the cooling fans
will continue to run even when you
have turned the oven off. The fans
will switch off automatically when
the oven has cooled.
Wait until the progress bar on the
screen disappears: the oven will
then be ready to use.
You can only adjust the clock
setting while the oven is not set for
automatic cooking.
Advertisement
Table of Contents
