Table of Contents
Advertisement
Installation
1. Apply the sealing strip to all four sides of the bottom surface of the refrigerator (fig. h 1).
2. Push the refrigerator into position (fig. h 2).
✔ The space behind the refrigerator is sealed to the interior of the vehicle.
Sealing the refrigerator using the bottom trim
If the refrigerator is placed on a platform, the bottom trim must be installed to seal the space between the refriger-
ator and the platform.
i
1. Apply a sealing strip (fig. i 1) to the lower surface of the bottom trim piece.
2. Push the bottom trim with the four plugs (fig. i 2) into the holes on the bottom frame of the refrigerator.
3. Snap the three catches (fig. i 3) into the holes under the bottom frame of the refrigerator.
8.7 Securing the refrigerator
!
CAUTION! Electrocution hazard and damage hazard
• Only screw through the holes provided on the refrigerator for fastening to prevent injury from
damaged electrical cables or damage to foamed components.
• Ensure to tighten the screws firmly so that they do not loosen under increased load (e.g., while
driving).
1. Slide the refrigerator into its final place.
2. Align the refrigerator so that
– The front flange is flush with the front edge of the recess.
– The refrigerator is standing level.
24
1
RUC 5208X, RUC 6308X, RUC 8308X
2
3
EN
Advertisement
Table of Contents
