Kenwood KR-A5060 Instruction Manual page 7

sreeeeee renee terest,
Wisueksoevecene SCR
SPEAKER SYSTEM A
@ While pressing lever (holding it).
@ Insert cord.
a
@) Release.
RK L
e Never short-circuit the + and - speaker cords. Meseteseces Weeteretets
@ If the left and right speakers are connected inversely or if the reeceseseee NSetereet
* . }, 4
speaker cords are connected with reversed polarity, the sound Wecotocates retecetatene
. 1 rs ays . +, 0,0,4, 9,9, 0,6, %,0,9,.¢ becomes unnatura! with.ambigous acoustic image positioning. renecotatere MEM Neceratetet
CK KSAT 0,0. 4. © @.:
Be sure to connect the speakers and speaker cords correctly. Watatetstet eestatataty
SPEAKER SYSTEM B
PERE REESE REN OME OEP TREC FOOT os REC DR SS PRIS av eo SS a
Speaker IMPEDANCE SELECTOR CAUTION : During operation of the speaker IMPEDANCE SELECTOR, set the POWER switch to OFF.
Set the IMPEDANCE SELECTOR switch on the rear panel according to the impedance of the speakers used.
Front speaker impedance a Selector position ;
IMPEDANCE SELECTOR
Aor B speakers 42 — 62 Aor LESS THAN)
A and B speakers 8Q ~ 16Q oeMee <> SuOR MORE
Ci
IMPEDANCE SELECTOR
AarB: LESS THAN 812
Aor B speakers 8Q — 16Q S6JOR MORE ce SHOR MORE
>i]
e |t is not possible to use both A and B speaker systems if speakers have impedances from 4 ohms to 6 ohms.