Kenwood KR-A5060 Instruction Manual page 11

ontrols and indicators
Broadcast band
indicators
Tuning mode indicator
TUNED indicator
TAPE 2 indicator
AM . #¥ STEREO REGEIVER KA - ASOBO
@TONE control knobs
@Numeric keys
Remote control sensor
Q@STAND BY indicator
@AUTO key
Press to select the auto tuning mode.
Q@MEMORY key
Press to preset a station in the memory.
@BAND key
Press to switch the broadcast band.
@TUNING key
Press to tune broadcasl stations
© DIRECT key
Press for direct station tuning based on nu-
merical input.
STANDY BY mode of POWER switch
When the power cord of this system is plugged into an AC outlet, the STAND BY indicator lights up regardless of the ON/OFF seiting of the
POWER switch. This indicates that a small amount of current is being supplied to the unit to back up the memory contents. This mode is referred
to as the Stand By mode. While the STAND BY indicator is lit. the power of the system can be switched ON/OFF from the remote control unit.
VIDEO 1/2 indicators
MEMORY indicator Reception mode indicator
Display > 3
"ate G27 GW) Ww
VOLUME | CONTROL
(Bj Dp &
@P.CALL key
Press to recall a preset station.
VOLUME CONTROL knob
(BPOWER key
(BPHONES jack
Used for headphone listening.
(BSPEAKERS A/B switches
Press to select the A and/or B speaker sys-
tems.
(BINPUT SELECTOR keys
Turn to select the input sources.
(LOUDNESS switch
Press to enhance low frequencies.
(PBALANCE control knob
Turn to adjust the volume balance between
left and right.