Zanussi MW530D Instructions Manual page 17

To Change To Programme
Time
1. Push rx I TIME Pad until memory to be
changed is in the Display.
2. Push LU CHANGE/CANCEL Pad
once.
3. Enter in new time or temperature by
touching Number Pads.
4. Push [E START.
Power_
1. Push 1 X 1 POWER Pad until memory
to be changed is in display.
2. Push EE CHANGE/CANCEL Pad
once. "HI" will appear in Display.
3. Enter new Power setting.
4. Push 1 l> I START Pad and oven will
resume operation at new Power setting.
Example for Using and
Programming the Memory
Chocolate cake 1 Pkt. chocolate cake mix
170 ml water
1 egg
1. Combine cake mix with water and egg in
medium mixing bowl. Beat well with
wooden spoon. Spread in 9-inch round
glass baking dish.
2. Microwave on I 5
~1
BRAISE for 7
minutes. _
3. Microwave on i X 1 HIGH for 2-3
minutes or until toothpick inserted near
centre comes out clean.
Memory 1
1. Push SH TIME Pad.
2. Enter
PH RH RH
3. Push ] z l POWER Pad.
4. Enter 1 5 l BRAISE power.
Memory 2
5. Push 1 X 1 TIME Pad.
6. Enter [T] [T] OD
7. Push rm START Pad.
1st Memory
The first memory will begin the cooking
on 1 5~1 BRAISE because the cake needs
to start cooking slowly. A memory tone
will sound to remind you when the oven
changes to the next memory. The
indicator provides a visual display.
2nd Memory
The second memory automatically
increases the power setting to i ^ 1 HIGH
for 2 minutes to quickly finish cooking the
cake. A tone sounds three times when the
time is up.
About 6 servings.
17