Zanussi MW530D Instructions Manual page 16

To enter next Memory:
7 PUSH THE dH TIME: The Indicator
showing that you are in "Memory 2"
will appear.
8 SET THE DESIRED TIME: Push the
appropriate Number Pads. The time
will appear in the Display Window.
The "Memory 2" indicator will remain
on.
9
PUSH THE □□ POWER PAD: The
Power indicator comes on and "HI"
appears in the Display Window. This
is to remind you that the oven will
always operate at full power unless
you change the Power setting.
10
SELECT THE POWER SETTING
YOU DESIRE: Push the Number Pad
next to the Power words. For example
if the recipe calls for cooking at the
BAKE setting, you would push m.
The Display Window will read "70".
This means that the oven is operating
at 70% of full power.
11 PUSH THE EH START PAD: Time
for first memory will start counting
down. (If Cooking by Temperature,
-34 will appear in the Display for
temperature and will increase with
the actual temperature.) At the end of
the first memory, a tone will sound
once and the oven will automatically
shift to the next memory. An
indicator will remind you that the
oven is cooking in the second
memory. At the end of cooking, a tone
sounds three times.
NOTE:
The oven will automatically stop
cooking if cooking with time.
12 OPEN DOOR, REMOVE FOOD,
(AND PROBE IF FITTED) CLOSE
DOOR.
To Check
Time
1. Push CU TIME.
Time will be displayed.
2. Push I Z 1 TIME Pad again; next
memory will be displayed.
3. Push 1 ItH START Pad to return to time
counting.
Power Setting
1. Push
[~%~1
POWER Pad. Power setting
will appear in Display.
2. Push LVJ POWER Pad again; next
power memory will be displayed.
3. Push LE START Pad to return to time
counting or actual temperature.
16