Operating With Time And Variable Power - Zanussi MW530D Instructions Manual

Operating with Time
& Variable Power
Each recipe in the cookbook gives the
approximate cooking time. Start with the
shorter time and add time if needed. The
cookbook is only a guide, as food
temperature and density can vary the
time.
1 OPEN DOOR: Interior light comes on.
2
PLACE FOOD IN OVEN, CLOSE
DOOR: The light will go off. The oven
is now ready to programme.
3
PUSH THE
dH
TIME PAD: A colon
will appear in the display and the
indicator for "Memory 1" will be
displayed.
4
SET THE DESIRED TIME: Push the
appropriate Number Pads. The time
will appear on the Display. For
example, to set the time for 5 min.
30 secs., press I 5 ] 1 3 11 0 1
5
PUSH THE □□ POWER PAD: "HI"
appears in the Display Window. This
is to remind you that the oven will
always operate at full power unless
you change the Power Setting. The
indicator for Power will be displayed.
6 SELECT THE POWER SETTING
YOU DESIRE; Push the Number Pad
next to the desired setting. For
example, if the recipe calls for cooking
at the SIMMER setting you would
push number f ~6 1 • The Display will
read "60". This means that the oven is
operating at 60% of full power.
7 PUSH THE CE START PAD: Time
will begin to count down. A tone
sounds three times when the time is
up. The oven automatically stops
cooking and the oven light and fan
will switch off.
8 OPEN DOOR, REMOVE FOOD.
CLOSE DOOR.
To Check
Power Setting
1. Push I ^ 1 Power Pad. Variable power
setting will appear in Display.
2. Push fl> 1 START pad to return to time
counting down.
To Change
Time
1 Posh fin TIME Pad.
2. Push r®n CHANGE/CANCEL Pad
once, Display will clear.
3. Enter new time.
4. Push i lt> I START Pad and oven will
resume operation with new time counting
down in Display.
Power Setting
1. Push f ^ 1 POWER Pad.
2. Push dJ CHANGE/CANCEL Pad
once. "HI" will appear in Display.
3. Enter new Power setting.
4. Push [ IE 1 START Pad and oven will
resume operation at new Power setting.
14