Advertisement
Available languages
Available languages
With manual feed (MAN) climb cut is not permitted!
Danger of kickback!
4.3
Working method
4.4
Material to be machined
Wood, wood-based materials, plastics, advanced materials as well as materials with
comparable machining properties, according to given specifications.
5. Safe handling
5.1
Application
The tool is only allowed to be used as described in the section "Intended use".
The valid national rules for accident prevention and safety at work regulations have to be
observed - especially the safety requirements according to EN 847.
5.2
Transport
Wear safety gloves!
Risk of injury due to sharp cutting edges!
Wear safety boots!
Transport only with suitable packaging.
Be very careful when packing / unpacking!
09/2021 ID. 525083 V1.0
13
Advertisement
