Advertisement
Available languages
Available languages
3. Cutting materials and ordering details
3.1
Cutting Materials
HW = Tungsten carbide
DP = Polycrystalline diamond
3.2
Ordering details
Article description
Ident-Number
Number of cutting edges or
feed rate
4. Intended use
4.1
RPM n / n max.
The RPM range marked "n" on the tool has to be kept, resp. the specified max. RPM "n
max." is not allowed to be exceeded!
When using several tools on one spindle or arbor, the smallest value „n max." is the
maximum permissible operating speed.
4.2
Usage category and working method
The specifications of the machine manufacturer regarding type of feed and mode of
operation as well as permissible dimension and weight must be observed.
The specified tool is only allowed to be used for the type of feed marked on the tool.
MEC (Mechanical feed)
Tools marked with „MEC" must be used only on machines with mechanical feed!
MAN (hand feed)
Tools marked with „MAN" are specially designed for machines with manual feed or
feeding device, but may also be used on machines with mechanical feed!
12
Dimensions
Bore/Interface
Direction of rotation
RPM
09/2021 ID. 525083 V1.0
Advertisement
