Table of Contents
Advertisement
FRONT PANEL FACILITIES
O
TIMER mode selector
OFF:
Normally, be sure to leave the selector in this position except
for repeat playback.
REC:
Set to this position for timer recording. {See page 12)
PLAY:
Set to this position for timer playback. (See page 12}
@ Recording or playback may suddenly start when turning
power on with this selector in the REC or PLAY position.
@ When the selector is set to the PLAY position and the unit
is turned on with POWER switch (}) or an audio timer, the
unit automatically enters the playback mode.
REV MODE
(reverse mode) selector
—e
as
Tape transport stops after one side of a tape is played or
recorded.
aD:
When the forward playback (P) button is pressed, each side
of the tape is played or recorded once. When the reverse play-
back ( €) button is pressed to play or record on the tape, tape
transport stops at the end of the reverse side (the side facing
away from you when you toaded the tape).
Cad:
When the forward playback {®) button is pressed, both sides
of the tape are played continuously until 32 sides have been
played. When the reverse playback ( €) button is pressed, both
sides of the tape are played continuously until 31 sides have
been played. In record mode, both sides of the tape are record-
ed once and then tape transport stops.
RELAY/SKIP button
Press this button to perform relay playback from deck | to deck
Hor from deck tl to deck |.
When this button is pressed and a blank section of more than
15 seconds is encountered during playback, the unit fast for-
wards the tape to the beginning of the next selection and play-
back starts at that point.
SYNCHRO
COPY (I> I!) buttons
NORMAL SPEED:
Starts tape copy at normal speed from deck t to deck I}
HIGH SPEED:
Starts tape copy at double speed (half time, from deck | to
deck 1).
CD SYNCHRO
button
This button is used to carry out CD-Deck synchro recording
from a CD piayer. (See page 13)
Fast reverse button (44, MS)
To fast-reverse the tape in the direction of the arrows. When
pressed during playback, the unit will skip one selection each
time the button is pressed, then starts playback from the be-
ginning of the next selection. (See page 10}
Playback button (» or <4)
Play >:
Press this button to play back or record on the forward side
of the tape (the side facing you). (Forward playback/recording}
Used to start recording in record-standby mode.
Play <€:
Press this button to play back or recard on the reverse side
of the tape {the side facing away from you), (Reverse play-
back/recording)}
Used to start recording in record-standby mode.
Stop button (Mi)
To stop all operations, including tape copy.
Fast forward button (>,
MS)
To fast-forward the tape in the direction of the arrows. When
pressed during playback, the unit will skip one selection each
time the button is pressed, then start playback from the be-
ginning of the next selection. (See page 10)
MIC-L/R jacks (CT-W630R only)
To insert the plugs of the microphones L and R.
Operating Display
®
@ DECK | Tape Transport Mode Indicators
(See page 8)
DOLBY NR indicator
@ When Doiby NR is off
DOLBY
NR
@ Dolby B-type NR on
OOLsY
NR
:
ce
@ Dolby C-type NR on
DOLBY
NF
© RELAY PLAY Indicator
Lights up when RELAY/SKIP button is pressed to start relay
playback or to activate skip mechanism,
@® SYNCHRO COPY Indicator
Lights up during the tape copy operation.
@ Normal-speed copy
SYNCHRO:
CORY
@ High-speed copy
@® LEVEL Meter
Holds peak indications for about 1.2 second. The oo beside
the +3 dB mark indicates the Doiby NR systems standard level.
® DECK 1! Tape Transport Mode Indicators
(See page 8}
@© DOLBY HX PRO indicator (CT-W630R only}
This unit is provided with a built-in Dolby HX PRO Headroom
Extension circuit. The DOLBY
HX PRO indicator always ap-
pears on the display when the POWER switch is turned on
@ CD SYNCHRO indicator
Lights when synchro recording from a CD player is being car-
ried out.
Advertisement
Table of Contents
