Mounting The Cover - OBO Bettermann UG 46-GS Mounting Instructions

6 7 5
UP Flush-mounted boxes
2. Place the screw domes of the plaster compensation ring on the screw
domes of the flush-mounted box.
3. Screw on the plaster compensation ring with the device screws.

Mounting the cover

Attaching/removing the signal cover
The signal cover can be used to protect flush-mounted boxes during
plastering. After plastering, the signal bristles show the position of the
flush-mounted boxes. The signal cover can be removed with a screw-
driver.
Fig 27: Attaching the signal cover
1. Before plastering, push the signal cover onto the flush-mounted box.
Fig 28: Removing the signal cover
2. Push the screwdriver through the plaster between the signal bristles
and carefully remove the cover.
Mounting
29 | EN