Fixing Flush-Mounted Boxes With Nail Straps - OBO Bettermann UG 46-GS Mounting Instructions

6 5 3
Note!
UP Flush-mounted boxes

Fixing flush-mounted boxes with nail straps

Using the nail straps, it is possible to fix the flush-mounted box in the drill
hole without plastering or sticking. The precondition is soft stone or the
option of nailing into the mortar joint. The final fixing of the flush-mounted
box is carried out by plastering.
Tolerances during fixing can be compensated for using the slots in the
nail straps.
1
2
Fig 18: Fixing the flush-mounted device box with nail straps
1
Marking for alignment of the socket
2
Slots for tolerance compensation
1. Push the flush-mounted box into the drill hole until the nail straps are
located on the masonry.
2. Align the box and fix it to the wall with steel nails.
Mounting
23 | EN