More Features - Honwell TCD-880E Instruction Manual

MORE FEATURES

A. SLEEP SETTING (BY REMOTE CONTROL)
1. PRESS "SLEEP" BUTTON AND SLEEP INDICATOR "
2. KEEP PRESSING THE BUTTON TO ADJUST THE SLEEP TIMER IN THE ORDER OF 90 > 75 >60....15 MINUTES.
3. SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING.
4. TO CANCEL THE SLEEP MODE, PRESS " SLEEP " BUTTON UNIT IT REACHS "OFF" MODE.
REMARK:-
IF PRESS THE SLEEP BUTTON ONCE AND THE SLEEP INDICATOR "
SYSTEM WILL GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED MINUTES.
B. ALARM CLOCK SETTING (BY REMOTE CONTROL)
THIS FUNCTION ALLOWS THE SYSTEM TO TURN ON AUTOMATICALLY AND WAKE YOU UP BY CD, TUNER, OR
USB RESPECTIVELY.
FIRST, SET THE UNIT AT STANDBY MODE AND THEN PRESS & HOLD THE " TIMER " BUTTON TO ENTER THE
SETTING MODE, THE LCD DISPLAY WILL SHOW SET TIME – SELECT SOURCE :-
1) WAKE UP SOURCE : PRESS THE " FUNCTION " BUTTON TO SELECT THE SOURCE FROM " TUNER " " USB "
2) WAKE UP TIME : PRESS
" TIME " BUTTON " TO STORE THE MEMORY.
REMARK

THE UNIT WILL SWITCH OFF AUTOMATICALLY AFTER SETTING THE ALARM. THE WAKE UP VOLUME IS
PRESET AT LEVEL 20.

IF THERE IS NO MUSIC SOURCE BEING DETECTED (SUCH AS USB/CD) WHEN THE PRESET TIME IS
REACHED, SYSTEM WILL DEFAULT TO TUNER MODE AUTOMATICALLY.

FOR TUNER WAKE UP, THE SYSTEM WILL PRESET AT THE LATEST RADIO FRQUENCY BEING LISTENED
BEFORE SWITCHING OFF.

PLEASE SWITCH OFF THE SYSTEM MANUALLY DURING ALARM WAKE UP MODE AS THE SYSTEM WILL NOT
TURN OFF AUTOMATICALLY AFTER ALARM ON MODE.
 ACTIVE/DE-ACTIVE TIMER FUNCTION
TO ACTIVE THE ALARM, PRESS ONCE THE " TIMER " BUTTON ON REMOTE HANDSET AT STANDBY MODE
1.
UNTIL THE TIMER INDICATOR "
TO CANCEL ALARM FUNCTION BY PRESS ONCE AGAIN " TIMER " BUTTON AT STANDBY MODE UNTIL THE
2.
TIMER INDICATOR "
C. PRE-SET EQ FUNCTION (BY REMOTE CONTROL)
THIS UNIT PROVIDES 4 DIFFERENCES SOUND MODE TO ENHANCE YOUR LISTENING EXPERIENCE. YOU CAN
SELECT THE DESIRED EFFECT BY PRESSING THE " PRESET EQ" BUTTON REPEATEDLY AT FOLLOWING
SEQUENCE:-
FLAT CLASSIC
D. DISPLAY FUNCTION (BY REMOTE HANDSET)
PRESS TO INDICATE THE CURRENT TIME WHEN THE SYSTEMS IS OPERATING BY ANY MODE OF ALL
FUNCTIONS.
" CD " REPEATLY. PRESS " TIMER " BUTTON AGAIN AFTER SELECTED THE SOURCE.
SKIP UP / DOWN
" IS SHOWN ON LCD DISPLAY.
" DISAPPEAR.
ROCK
" WILL SHOWN ON THE LCD DISPLAY.
" APPEAR ON THE LCD DISPLAY, THE
" BUTTON
TO SET THE HOUR & MINUTES AND PRESS
POP JAZZ
13