Line Out Connection - Honwell TCD-880E Instruction Manual


PLAY EJECTION
PRESS THE EJECT BUTTON ANYTIME DURING PLAYBACK WILL RETURN THE TONE ARM TO THE REST
POSITION IMMEDIATELY.
Remark :
- DUE TO THE AUTO RETURN SYSTEM WAS MECHANICAL DESIGN AND RESET POINT WILL
AFFECTED AFTER TRANSPORTAATION. THUS, THE TONE ARM WILL RETURN TO THE REST
AUTOMATICALLY WHEN FIRST TIME PLACE IT TO THE PLATTER AND IT WAS NOT THE
MALFUCTION
- DUE TO THE LENGTH OF THE RECORD IS VARIOUS, IF YOU FIND THE TONE ARM CANNOT RETURN
AUTOMATICALLY AFTER PLAYBACK OF RECORD. PLEASE PRESS THE EJECT BUTTON AND
RETURN THE TONE ARM BACK TO THE REST POSITION
- THIS TURNTABLE SYSTEM IS USING A MAGNETIC CARTRIDGE SYSTEM AND USER MUST
REPLACE THE SAME TYPE OF CARTRIDGE TO AVOID MALFUNCTION OF THE UNIT.
ADJUSTMENTS
PLATTER SPEED ALIGNMENT
DURING PLAYBACK OF RECORD, TURN THE PITCH ADJUSTMENT TO FINE ADJUST THE PLATTER
-
ROTATION SPEED.
- TURNING CLOCKWISE (+) WILL INCREASE THE TURNING SPEED AND ANTI-CLOCKWISE (-) WILL SLOW
DOWN THE SPEED.
TURN THE PITCH ADJUSTMENT UNTIL THE OUTPUT SOUND PERFORMANCE IS UP TO YOUR
-
SATISFACTION
TONE ARM STOPPING POSITION ALIGNMENT
- THE POSITION OF THE TONE ARM COMPLETE PLAYBACK AND RETURN TO THE REST STATION CAN BE
ADJUSTED AT THE ALIGNMENT SCREW AS FOLLOW:-
- BEFORE STARTING THE ALIGNMENT, PLEASE TAKE OUT THE HOLE COVERING RUBBER:-
A) IF THE SYSTEM CANNOT COMPLETE THE PLAYBACK OF RECORD AND RETURN EARLIER
1) USE A CROSS HEAD SCREW DRIVER AND TURNING THE ALIGNMENT SCREW INSIDE THE HOLE
CLOCKWISE, THE STOPPING AND EJECT POSITION OF THE TONE ARM WILL MOVE MORE INWARD TO THE
CENTER OF THE RECORD BEFORE PLAYBACK COMPLETION.
B) IF THE SYSTEM CANNOT RETURN TO REST POSITION AUTOMATICALLY AFTER PLAYBACK OF RECORD
2) USE A CROSS HEAD SCREW DRIVER AND TURNING THE ALIGNMENT SCREW INSIDE THE HOLE ANTI-
CLOCKWISE, THE STOPPING AND EJECT POSITION OF THE TONE ARM WILL MOVE MORE AWAY FROM THE
CENTER OF THE RECORD BEFORE PLAYBACK COMPLETION.
REMARK:-
- THE STOPPING POSITION IS VERY SUBJECTIVE AMONG DIFFERENCE CUSTOMERS, PLEASE SELECT THE
MOST SUITABLE POSITION BASED ON YOUR OWN RECORD COLLECTION. THE EX-FACTORY SETTING IS
BASED ON THE MOST COMMON TEMPLATE.
- PLEASE CHECK THE STOPPING POSITION TIME BY TIME DURING ADJUSTMENT AND AVOID OVER TURNING
OF THE SCREW INSIDE.

LINE OUT CONNECTION

YOU CAN CONNECT THE SYSTEM TO YOUR WHOLE HI-FI SYSTEM BY CONNECTING THE LINE OUT SOCKET
TO THE AUXILIARY INPUT SOCKET WITH A RCA CABLE (NOT PROVIDED).
12