Pioneer PD-M407 Operating Instructions Manual page 14

| TO PLAY ONLY DESIRED TRACKS/DISCS
14
DELETE PROGRAM PLAYBACK - TO DELETE
UNDESIRED TRACKS/DISCS (PD-M427 only)
1. With the player stopped, press the DELETE button,
so that the DELETE indicator lights.
2. Use the DISC button or one of the DISC NUMBER
(DISC 1-DISC 6) buttons to select the disc number.
The selected disc number will be displayed.
3. Then, press the << << or B® PPI button to
select the track number.
The selected track number will be displayed.
4, Press the DELETE button, or wait two seconds;
the track to be deleted wiil be input.
If the DELETE button is pressed after selecting the disc
number only, the "AL" indicator will appear, indicating se-
lection of the "Dise All Delete mode (the entire disc con-
tents willbe deleted from the program memory). While the
"AL indicator is displayed, however, if the xt <t<@ oF b>
Pi button is used to designate a track number and the
DELETE bution is then pressed (or after two seconds
elapses), the selected track will be deleted as that program
step.
5. Repeat steps 2, 3 and 4 to delete other tracks.
6. Press the P/i button. ;
All tracks other than deleted tracks/discs are played in the
order of the discs and track numbers. When tracks have
been played, the player enters stop mode.
NOTE:
When a track is selected with the Ix¢<¢ << of b> BR) button
in step 3, the displayed track number is automatically
programmed if the t«¢ << or BR» | button is not pressed
within 2 seconds. Therefore, be sure to press the t<¢ «<< or
b> bP button sequentially until the desired track nurnber
appears on the display.
To stop Delete program playback, Press the @
button.
e Track number 33 or above cannot be deleted.
¢ To go to the previous or next disc/track other than the
deleted disc/track, press the ke << of BE bP button.
© ifthe magazine isin the player, the delete program contents
will not be erased even if the power is turned off.
NOTE: ;
After programming for Program playback or during Program
playback mode, Delete programming can not be carried out.
To clear all of the Delete program contents:
® During stop mode, press the @ button.
® When the magazine is ejected, the program contents wil!
be cleared.
© Press the CLEAR button on the remote control unit during
stop mode or play mode. When the CLEAR button is
pressed during Delete program playback mode, the player
enters normal playback mode.