Kohler K-8741 Installation Manual

INSTALLATION GUIDE
Tools Needed:
Wrench
Install the Toilet Seat
Snap open the two hinged lids that cover the seat bolt holes.
Assemble the seat and the seat cover with two hinges. Fit the bolt trough
the hinges from the top.
Position the seat on the toilet so the bolts fit trough the toilet seat mount-
holes.
Loosely thread the nut on the bolts. Tighten the bolts holding the nut
if neccesary. Center the Seat as needed. Snap the hinged lids closed.
Open up and close down the toilet seat to ensure the proper installation.
Care and Cleaning
Clean the outside surface of your toilet seat with mild soap, such as liquid
dish soap and warm water. Wipe the entire surface completely dry with
a clean soft cloth. Do not use any abrasive cleaners, as they will scratch and
dull the surface. Avoid any detergents, disinfectants, or cleaning products
in aerosol cans. Avoid contact with abrasive chemicals and cosmetics, such as
fingernail polish and aftershave, as they may damage the finish of your
toilet seat.
X product numbers are for Thailand (i.e. K-12345X)
Kohler.com
Hinged Lid
Bolt
Toilet Seat Mounting Holes
TOILET SEAT
K-8741
Hinge
Washer
Nut
1021442-X2-A