Advertisement
Installing the Power Supply and Cord
1. Insert the power supply's 4-prong plug into the POWER jack.
When inserting the plug at the rear of the access unit, align the plug with the notch
above the POWER jack. Make sure the locking tab snaps securely into the jack.
2. Insert the 3-prong socket end of the power cord into the power supply's receptacle.
3. Insert the plug end of the power cord into the grounded power outlet.
Verification Check
-
Did the OK LED light?
If yes, the access unit has power and has passed self-test.
If no, refer to Troubleshooting on page 3.
2
Advertisement
