Part Names
Roll paper section
Feeder
Roll paper cover
open button
Cartridge cover tab
Power supply connector
Note:
DIP Switch 2 is intended for switching the interface. Do not change the position
of the DIP switch 2 except when changing the interface.
Hooking the USB cable on the locking wire saddle prevents the cable from
falling off.
Attaching the Feeder Guide
Feeding paper using the included feeder guide allows you to insert a
check straight. Also, the auto sheet feeder (ASF) model printers can feed
up to 25 checks without manual feeding.
Follow these steps to attach the feeder guide.
1.
Hold the edge of the feeder guide carefully.
Validation section
Locking wire saddle
USB connector
Scanner
Card entrance
Control panel
DIP switch 2
TM-J9000/J9100 User's Manual 5
English
Power switch