3.
Position the pocket as shown in the picture below, and push it into the
printer until it clicks in place.
➀
4.
Unfold the stopper of the pocket as shown in the following picture.
Stopper
Note:
To remove the pocket, place the printer vertically as shown in the picture
below; then while pushing up the lever on the bottom of the pocket, slightly
push the pocket backward, and then pull it up.
➁
➁
➀
Insert the hooks on the four corners of the
pocket into the holes indicated with the
circles, and move the pocket into place.
Push up the lever.
TM-J9000/J9100 User's Manual 7
English