Buttons - Bosch WGB24600UC User Manual And Installation Instructions

en-us Buttons

Buttons

8 Buttons
Buttons
Note: Additional functions may be available as a result of
software updates.
If a software update is available, you can find further
information in the Home Connect® app.
Button
(Start/Pause Reload)
SpeedPerfect
Intensive Plus
Stains
Finish in
Temp
Spin
(mains switch)
Remote Start
⁠ 3 sec.
Basic Settings
More
Mini Load
18
Selection
¡ Start
¡ Cancel
¡ Pause
Multiple selection
¡ Activate
¡ Deactivate
¡ activate
¡ deactivate
Multiple selection
Up to 24 hours
Cold - Extra Hot
No (Spin) - High
¡ Switch on
¡ Standby mode
¡ Restart the appliance
¡ Activate
¡ Deactivate
¡ Open the
Home Connect® menu
¡ Activate
¡ Deactivate
Multiple selection
¡ Displaying or hiding
additional buttons
¡ Activate
¡ Deactivate
Some buttons are hidden for a reduced display. You can
display these additional buttons on the display.
→ "Displaying or hiding additional buttons", Page 15
The selection of program settings depends on the program
that is set.
More information
Start, cancel or pause the program.
If is displayed, you can pause the program.
If is displayed, you can start the program.
To change a setting, press the
until the display shows the required setting.
Activate or deactivate a shorter program duration.
Note: Energy consumption increases. The washing result
is not affected by this.
Activate or deactivate an extended washing program.
The program duration is extended by up to 30 minutes.
Suitable for heavily soiled laundry.
Select the type of stain.
The temperature, drum movement and soaking time are all
adjusted to suit the type of stain.
Set the program end time.
The program duration is already included in the set number
of hours.
Once the program has started, the program duration is
displayed.
Note: Press or until the display shows the required
setting.
Adjust the temperature.
Adjust the spin speed or deactivate the spin cycle.
If No (Spin) is selected, the water is drained and the spin
cycle is deactivated. The laundry stays wet inside the drum.
Switch on the appliance or put it in standby mode.
If the control panel does not respond, press and hold
approximately 5 seconds to restart the appliance.
→ "The appliance is not working.", Page 35
→ "Remote start", Page 27
→ "Control panel lock", Page 26
→ "Basic settings", Page 27
¡ If you briefly press the button, you can display or hide
additional buttons.
→ "Displaying or hiding additional buttons", Page 15
Wash small loads of delicate or hard-wearing fabrics.
The program duration is shortened, and the water and
energy consumption adjusted to the load.
Note: If you activate the setting, the program's maximum
load capacity is reduced to 1.1 lbs (0.5 kg).
or selection button
for