Annex A - Standards And Norms; Annex B - Plastics Used - Honeywell BK-G40 Instruction Manual

Honeywell
10. Annex A – Standards and norms
The industrial diaphragm gas meter complies with the following norms and
standards*:
2014/32/EU – Annex IV (MI-002)
2014/34/EU
DIN EN 1359
ISO 80079-36:2016-02
DIN EN ISO 80079-36:2016-12
ISO 80079-37:2016-02
DIN EN ISO 80079-37:2016-12
* Standards valid at the time of the operating instructions going to press.
11. Annex B – Plastics used
The following plastics have been used in the diaphragm gas meter:
Plastic parts
Index
Digit rollers
Index cover
Viewing glass
Index base
Gears and gear components
Measuring unit
22
Measuring Instruments Directive (MID)
ATEX Directive
Gas meters - Diaphragm gas meters
Potentially explosive atmospheres – Part 36: Non-
electrical equipment for explosive atmospheres –
Basic method and requirements
Potentially explosive atmospheres – Part 37: Non-
electrical equipment for explosive atmospheres –
Non-electrical type of protection constructional
safety "c", control of ignition sources "b", liquid
immersion "k"
Abbreviation
PBTP
PA 12/PPO
ASA
PC
PPE
PBTP/ASA
PBT/PF/POM
73020212j © Elster GmbH | All rights reserved. Subject to modification
Chemical Designation
Polybutylene terephthalate
Polyamide/Polyphenylene oxide
Acrylonitrile-styrene-acrylic ester
Polycarbonate
Polyphenylene ether
Polybutylene terephthalate/
Acrylonitrile-styrene-acrylic ester
Polybutylene terephthalate/
Phenol formaldehyde/
Polyoxymethylene