AEG L7WBI864T4 User Manual page 35

Make sure that the flap does not cause a
blockage when you close the drawer.
11.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme. The Eco
40-60 is the programme to which the
information of the energy label relates.
The indicator of Wash Mode button
illuminates.
The indicator of the Start / Pause
flashes.
The display shows an indicative programme
duration.
2. To change the temperature and/or the
spin speed, touch the related buttons.
3. If desired, set one or more options by
touching the related buttons. The related
indicators will light up and the given
information will change on the display
accordingly.
If a selection is not possible an acoustic
signal sounds and the display shows
.
11.6 Starting a programme
Touch the Start / Pause
the programme. It is not possible to start the
programme when the indicator of the button
is off and doesn't flash (e.g. the door is open).
The related indicator stops flashing and stays
on.
The programme starts, the door is locked.
The display shows the indicator
indicator appears to indicate that it is still
possible to stop the cycle and add garments.
The drain pump can operate shortly
before the appliance fills water.
11.7 Starting a programme with the
delay start
1. Touch the Delay Start button repeatedly
until the display shows the desired delay
time. The related indicator comes on.
button
button to start
and the
2. Touch the Start / Pause
appliance door locks and starts the
countdown of the delay start. The display
shows the indicator
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after the
countdown has started
To cancel the delay start:
1. Touch the Start / Pause
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button repeatedly
until the display shows .
3. Touch the Start / Pause
to start the programme immediately.
Changing the delay start after the
countdown has started
To change the delay start:
1. Touch the Start / Pause
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button repeatedly
until the display shows the desired delay
time.
3. Touch the Start / Pause
to start the new countdown.
11.8 The ProSense Technology load
detection
The programme duration in the display is
referred to a medium/high load.
After touching the Start / Pause
the maximum declared load indicator goes
off, the ProSense Technology starts the
laundry load detection:
1. The appliance detects the load in the first
30 seconds. In the programmes where
Time Save is available, during this phase
the Time Save bars
the time digits play a simple animation.
The drum rotates shortly.
button. The
.
button to
button again
button to
button again
button,
placed below
ENGLISH 35