Advertisement

Quick Links

L7WEE862S
USER
MANUAL
EN
User Manual
Washer Dryer

Advertisement

Table of Contents
loading

Summary of Contents for AEG L7WEE862S

  • Page 1 L7WEE862S User Manual Washer Dryer USER MANUAL...
  • Page 2: Table Of Contents

    20. ENVIRONMENTAL CONCERNS..............49 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3: Safety Information

    ENGLISH Subject to change without notice. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4 Children shall not carry out cleaning and user • maintenance of the appliance without supervision. 1.2 General Safety Do not change the specification of this appliance. • This appliance is intended to be used in household • and similar applications such as: staff kitchen areas in shops, offices and other –...
  • Page 5 ENGLISH The operating water pressure at the water entry point • from the outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa). The appliance maximum load is 8 kg. Do not exceed • the maximum load of each programme (refer to the "Programmes"...
  • Page 6: Safety Instructions

    The final part of the washer dryer cycle takes place • without heat (cool down cycle) to ensure that items reach a temperature that will not cause damage to them. Do not use high pressure water sprays and/or steam •...
  • Page 7 ENGLISH • Before connection to new pipes, pipes • Remove a detergent ball (if used) not used for a long time, where repair before starting a drying programme. work has been carried out or new • Do not use a detergent ball if setting a devices fitted (water meters, etc.), let non-stop programme.
  • Page 8: Product Description

    • Remove the door catch to prevent for the disposal of Waste Electrical children or pets from becoming and Electronic Equipment (WEEE). trapped in the drum. • Dispose of the appliance in accordance with local requirements 3. PRODUCT DESCRIPTION 3.1 Appliance overview...
  • Page 9: Technical Data

    ENGLISH 4. TECHNICAL DATA Dimension Width/ Height/ Total 59.7 cm /84.7 cm /66.0 cm depth Electrical connection Voltage 230 V Overall power 2200 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles IPX4 and moisture ensured by the protective cover, ex‐ cept where the low voltage equipment has no pro‐...
  • Page 10 4. Open the door and remove the 8. Pull up the appliance in vertical polystyrene piece from the door seal position. and all the items from the drum. 5. Carefully put the appliance down on 9. Remove the power supply cable and its rear side.
  • Page 11 ENGLISH 11. Pull out the plastic spacers. 12. Put the plastic caps, that you find in the user manual bag, in the holes. The appliance must be level and stable. A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation.
  • Page 12 45º 45º 20º 20º If this occurs, close the water tap and contact the authorized service centre to replace the hose. 5.5 Water drainage The drain hose should be positioned at a height of not less than 60 cm and not Make sure that the inlet hose more than 100 cm from the floor.
  • Page 13 ENGLISH 5. Without the plastic hose guide, to a sink spigot - Put the drain hose in the spigot and tighten it with a clamp. Refer to the illustration. Make sure that the drain hose end is not immersed in the water.
  • Page 14: Accessories

    6.2 Fixing plate kit If you install the appliance on a plinth that is not an accessory supplied by AEG, secure the appliance in the fixing plates. Read carefully the instructions supplied with the accessory. 6.3 Stacking kit...
  • Page 15: Control Panel

    ENGLISH 7. CONTROL PANEL 7.1 Control panel description 11 10 Programme dial • Manchas • Pré-lavado Display Delay Start touch button (Inicio Drying time touch button (Tiempo/ diferido) Tempo) Time Saving touch button (Rápido) Drying level touch button (Sec. Auto) Spin reduction touch button (Centrif.) Washing and drying mode touch •...
  • Page 16 Maximum load indicator. The icon flashes during laundry load esti‐ mation (refer to "PROSENSE load detection" paragraph). Maximum laundry indicator. It flashes when the laundry load exceeds the maximum declared load of the selected programme. If you run a...
  • Page 17: Dial And Buttons

    ENGLISH 8. DIAL AND BUTTONS 8.1 On/Off The display shows only the spin speeds available Pressing this button for a few seconds for the set programme. allows to activate or deactivate the • Set the drain-only option (Skipping appliance. Two different tunes sound the wash, rinse and spin phases): while switching the appliance on or off.
  • Page 18 8.8 Tiempo/Tempo This option is not available with a In the programme where it is selectable, temperature lower than touch this button to set the time that suits 40 °C. the fabrics you have to dry (refer to • Pré-lavado "Timed drying"...
  • Page 19: Programmes

    ENGLISH 9. PROGRAMMES 9.1 Programme Chart Programme Reference Maximum Programme description Default tempera‐ spin speed load ture Spin speed Temperature range range 1600 rpm Eco 40-60 (Wash 1600 rpm - 8 kg only mode) 400 rpm 40 °C White cotton and fast-coloured cotton. Normally soiled items.
  • Page 20 Programme Reference Maximum Programme description Default tempera‐ spin speed load ture Spin speed Temperature range range Do not use fabric softener Outdoor and make sure that there is no softener residue in 30 °C the detergent dispenser. 40 °C - Cold Outdoor clothing, technical, sport fab‐...
  • Page 21 ENGLISH Programme Reference Maximum Programme description Default tempera‐ spin speed load ture Spin speed Temperature range range Steam programmes Vapor Steam can be used for dried, washed worn once laundry. These pro‐ grammes can reduce creases and odours and make your laundry softer.
  • Page 22 Programme Reference Maximum Programme description Default tempera‐ spin speed load ture Spin speed Temperature range range To rinse and spin the laundry. All fab‐ 1600 rpm rics, except woollens and very delicate Aclarado/Enxag. 1600 rpm - 8 kg fabrics. Reduce the spin speed accord‐...
  • Page 23 ENGLISH Options ■ ■ ■ ■ ■ ■ ■ Drenar ■ ■ ■ ■ ■ ■ ■ Centrif. ■ ■ ■ ■ ■ ■ ■ Aclarado/Enxag. Extra ■ ■ ■ ■ Pré-lavado ■ ■ ■ ■ Manchas ■ ■ ■ ■...
  • Page 24 Programme Universal Liquid Uni‐ Liquid for Delicates Special versal coloureds woollens powder Algod. ▲ ▲ ▲ Sintéticos ▲ ▲ ▲ Delicados ▲ ▲ Lana/Lãs ▲ ▲ Outdoor ▲ ▲ Anti-Allergia ▲ ▲ ▲ 1) At temperature higher than 60 °C the use of powder detergent is recommended.
  • Page 25 ENGLISH Dryness Level Type of fabric Load Cottons and Linen up to 6 kg (bathrobes, bath towels, etc) Cupboard Dry For items to be stored Synthetics and mixed fab‐ up to 4 kg rics (jumpers, blouses, under‐ wear, household and bed lin‐ Delicate fabrics up to 2 kg (acrylics, viscose and deli‐...
  • Page 26: Before First Use

    Dryness Level Type of fabric Load (kg) Suggested Spin speed duration (rpm) (mins) Synthetics and mixed fabrics 135 - 145 (jumpers, blouses, underwear, house‐ 1200 hold and bed linen) 40 - 50 1200 Delicates 140 - 160 (acrylics, viscose and delicate mixed...
  • Page 27: Settings

    ENGLISH 11. SETTINGS 11.1 Child Lock • The appliance has a malfunction (sequence of short sounds for about 5 With this option you can prevent that the minutes). children play with the control panel. To deactivate/activate the acoustic signals when the programme is •...
  • Page 28 Make sure not to put too much laundry in the drum. Always follow the 4. Close the door firmly. instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level ( ).
  • Page 29 ENGLISH 4. To use liquid detergent, turn the flap The indicator of the Inicio/Pausa button down. flashes. The display shows the maximum declared load for the programme, the default temperature, the maximum spin speed, the washing phase indicators (when available) and an indicative programme duration.
  • Page 30 At the end of the load detection, in case The ProSense estimation starts at the end of the of drum overload, the indicator countdown. flashing in the display: Cancelling the delay start In this case, for 30 seconds, it is possible...
  • Page 31 ENGLISH If you select the a steam programme, the If the temperature and level steam phase indicator comes on. of the water in the drum are too high and/or the drum still 12.10 Interrupting a rotates you cannot open the programme and changing the door.
  • Page 32: Daily Use - Washing & Drying

    4. Keep the door and the detergent In any case, the appliance dispenser slightly ajar to prevent empties the water out mildew and odours. automatically after 5. Close the water tap. approximately 18 hours. 12.14 Draining water out after 12.15 Stand-by option...
  • Page 33 ENGLISH 1. After loading laundry and detergent, 2. Touch button Inicio/Pausa to start the press the On/Off button for some programme. The PROSENSE seconds to activate the appliance. estimation starts. 2. Load the laundry one item at a time. In the display the door locked 3.
  • Page 34: Daily Use - Drying Only

    After drying phase, clean the drum, the seal and the inside of the door with a wet cloth. 14. DAILY USE - DRYING ONLY WARNING! Extra dry: for cotton Refer to Safety chapters. items. The display shows the drying This appliance is an programme duration.
  • Page 35: Fluff In The Fabrics

    ENGLISH • The indicator of button Inicio/Pausa 1. Remove the laundry from the appliance. goes off. The door locked goes 2. Make sure that the drum is empty. • Press the button On/Off for some After drying phase, clean the seconds to deactivate the appliance.
  • Page 36 Inicio/Pausa button. The spin phase continues. • Button up pillowcases, close zippers, hooks and poppers. Tie up belts, cords, shoelaces, ribbons and any other loose elements.
  • Page 37 ENGLISH • unsatisfactory washing results, • Check if the drain hose is connected • the wash load to turn grey, properly. Refer to installation chapter • greasy clothes, for more information. • mould in the appliance. • For the maximum laundry load of the drying programmes, refer to the Excessive detergent may cause: drying programmes table.
  • Page 38: Care And Cleaning

    To avoid the static charge at the end of WARNING! the drying cycle: To avoid creasing and 1. Use fabric conditioner in the washing shrinkage do not overdry cycle. the laundry. 2. Use special fabric conditioner for tumble dryers.
  • Page 39 ENGLISH 17.4 Descaling If the water hardness in your area is high or moderate, we recommend that you use a water descaling product for washing machines. Regularly examine the drum to check for limescale. The regular detergents already contain Clean it when needed, using ammonia water softening agents, but we cream cleanser agent without scratching recommend to run a cycle with empty...
  • Page 40 17.8 Cleaning the detergent 3. Flush the detergent drawer out under running warm water to remove any dispenser traces of accumulated detergent. After cleaning, replace the top part in To prevent possible deposits of dried its position. detergent or clotted fabric softener 4.
  • Page 41 ENGLISH 7. Turn the filter anti-clockwise to remove it. 2. Place a suitable bowl below the drain pump access to collect the water that flows out. 8. If it is necessary, remove fluff and 3. Open the chute downwards. Always objects from the filter recess.
  • Page 42 2. Remove the inlet hose from the appliance by loosening the ring nut. 12. Close the pump cover. 3. Clean the valve filter on the back of the appliance with a toothbrush. When you drain the water with the...
  • Page 43: Troubleshooting

    ENGLISH 1. Put 2 litres of water in the main wash 3. Put the two ends of the inlet hose in compartment of the detergent a container and let the water flow out dispenser. of the hose. 2. Start the programme to drain the 4.
  • Page 44 • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. The appliance does For this information, contact your local water authority. not fill with water prop‐...
  • Page 45 ENGLISH Problem Possible solution • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed. • Make sure that there is no damaged fuse in the fuse box. The programme does •...
  • Page 46 Problem Possible solution • Increase the detergent quantity or use a different detergent. • Use special products to remove the stubborn stains before The washing results you wash the laundry. are not satisfactory. • Make sure that you set the correct temperature.
  • Page 47: Consumption Values

    ENGLISH Make sure that the water level inside the drum is not too high. If necessary, proceed with an emergency drain (refer to «Emergency drain» in «Care and cleaning» chapter). To open the door, proceed as follows: 1. Press the On/Off button to switch the appliance off.
  • Page 48 Remaining moisture at the end of the cycle. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture at the end of washing cycle. Values and programme duration may differ depending on different conditions (e.g.
  • Page 49: Environmental Concerns

    ENGLISH Programme Litres h:mm °C Algod. 2.50 4:05 1600 95°C Algod. 1.50 3:50 1600 60°C Algod. 0.35 3:00 1600 20°C Sintéticos 0.80 2:15 1200 40°C Delicados 0.40 1:05 1200 30°C Lana/Lãs 0.30 1:05 1200 30°C 1) Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles.
  • Page 52 www.aeg.com/shop...

Table of Contents