Advertisement

L7WBG851
USER
MANUAL
EN
User Manual
Washer Dryer

Advertisement

Table of Contents
loading

Summary of Contents for AEG L7WBG851

  • Page 1 L7WBG851 User Manual Washer Dryer USER MANUAL...
  • Page 2: Table Of Contents

    20. ENVIRONMENTAL CONCERNS..............48 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3: Safety Information

    ENGLISH Subject to change without notice. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4 Children shall not carry out cleaning and user • maintenance of the appliance without supervision. 1.2 General Safety Do not change the specification of this appliance. • This appliance is intended to be used in household • and similar applications such as: staff kitchen areas in shops, offices and other –...
  • Page 5 ENGLISH The operating water pressure at the water entry point • from the outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa). The appliance maximum load is 8 kg. Do not exceed • the maximum load of each programme (refer to the "Programmes"...
  • Page 6: Safety Instructions

    The final part of the washer dryer cycle takes place • without heat (cool down cycle) to ensure that items reach a temperature that will not cause damage to them. Do not use high pressure water sprays and/or steam •...
  • Page 7 ENGLISH • Before connection to new pipes, pipes • Remove a detergent ball (if used) not used for a long time, where repair before starting a drying programme. work has been carried out or new • Do not use a detergent ball if setting a devices fitted (water meters, etc.), let non-stop programme.
  • Page 8: Product Description

    • Remove the door catch to prevent for the disposal of Waste Electrical children or pets from becoming and Electronic Equipment (WEEE). trapped in the drum. • Dispose of the appliance in accordance with local requirements 3. PRODUCT DESCRIPTION 3.1 Appliance overview...
  • Page 9: Technical Data

    If you install the appliance on a plinth authorised dealer that is not an accessory supplied by AEG, secure the appliance in the fixing Read carefully the instructions supplied plates. with the accessory. Read carefully the instructions supplied Only appropriate with the accessory.
  • Page 10 5. Carefully put the appliance down on WARNING! its rear side. Use the gloves. 6. Put the front polystyrene packaging element on the floor under the 1. Remove the external film. If appliance. necessary, use a cutter. Make sure not to damage the hoses.
  • Page 11 ENGLISH It is possible to see Make sure that carpets do water flowing from the not stop the air circulation drain hose. This is due below the appliance. to the testing with water Make sure that the appliance of the appliance in does not touch the wall or factory.
  • Page 12 6.3 The inlet hose 6.4 Water-stop device 1. Connect the water inlet hose to the The inlet hose has a water stop device. back of the appliance. This device prevents water leaks in the 2. Position it toward left or right hose because of its natural ageing.
  • Page 13 ENGLISH 5. Without the plastic hose guide, to a sink spigot - Put the drain hose in the spigot and tighten it with a clamp. Refer to the illustration. Make sure that the drain hose end is not immersed in the water.
  • Page 14: Control Panel

    The power supply cable must be easily The manufacturer does not accept any accessible after installing the appliance. responsibility for damage or injury through failure to comply with the above For any electrical work required to install safety precaution.
  • Page 15 ENGLISH 7.2 Display Maximum load indicator. The indicator flashes during the laundry load estimation. Maximum laundry indicator. It flashes when the laundry load exceeds the maximum declared load of the selected programme. If you run a programme when the drum is overloaded, also flashes at the end of the programme.
  • Page 16: Dial And Buttons

    Temperature indicator. The indicator appears when a cold wash is set. Spin speed indicator. - No Spin indicator. Iron drying indicator. Cupboard drying indicator. Extra drying indicator. 8. DIAL AND BUTTONS 8.1 Introduction 8.3 Introduction When pressing a key...
  • Page 17 ENGLISH After starting the cycle by the means of The display shows only the Inicio/Pausa button, the display the spin speeds available shows the selected delay time and the for the set programme. appliance begins the countdown. • Activate the No Spin option This option is available only with the 8.8 Rápido Centrifugar/Drenar programme.
  • Page 18: Programmes

    • Washing and drying : Lavar and You can not set all Secar indicators are on. automatic levels for each • Only drying : Secar indicator is on. type of fabrics. 8.12 Inicio/Pausa 8.11 Lavar+Secar Touch the Inicio/Pausa button to start,...
  • Page 19 ENGLISH Programme Reference Maxi‐ Programme description Default tempera‐ spin speed ture Spin speed load Temperature range range 1200 rpm Machine washable wool, hand washable 1200 rpm - wool and other fabrics with «hand wash‐ Lana/Lãs 1.5 kg 400 rpm ing» care symbol 40 °C 40 °C - Cold 1200 rpm...
  • Page 20 Programme Reference Maxi‐ Programme description Default tempera‐ spin speed ture Spin speed load Temperature range range Steam programmes Vapor Steam can be used for dried, washed or worn once laundry. These programmes can reduce creases and odours and make your laundry softer.
  • Page 21 ENGLISH Programme Reference Maxi‐ Programme description Default tempera‐ spin speed ture Spin speed load Temperature range range 1600 rpm All fabrics, except woollens and delicate 1600 rpm - fabrics. To spin the laundry and to drain the 8 kg Centrifugar/ water in the drum.
  • Page 22 Options ■ ■ ■ Manchas ■ ■ ■ Pre-Lava. Aclarado Ex‐ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Rápido ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Inicio diferido Tiempo/ ■ ■ ■...
  • Page 23 ENGLISH Programme Universal Liquid Uni‐ Liquid for Delicates Special versal coloureds woollens powder Camisas 20´- Lava+Seca ▲ ▲ 60´ 1) At temperature higher than 60 °C the use of powder detergent is recommended. ▲ = Recommended Company for the washing of wool garments labelled as “hand wash”...
  • Page 24 Dryness Level Type of fabric Load Cottons and Linen up to 5 kg (bathrobes, bath towels, etc) Cupboard Dry For items to be stored Synthetics and mixed fab‐ up to 3 kg rics (jumpers, blouses, under‐ wear, household and bed lin‐...
  • Page 25: Settings

    ENGLISH Dryness Level Type of fabric Load (kg) Suggested Spin speed duration (rpm) (mins) Synthetics and mixed fabrics 80 - 100 (jumpers, blouses, underwear, house‐ 1200 hold and bed linen) 45 - 55 1200 Delicates 100 - 120 (acrylics, viscose and delicate mixed 1200 fabrics) 60 - 80...
  • Page 26: Before First Use

    The appliance keeps the selection of this • Simultaneously touch the Temp. °C option after you switch it off. button and the Centrif. button once to add one extra rinse. appears on 10.3 Acoustic signals the display. • Simultaneously touch the Temp. °C The acoustic signals operate when the button and the Centrif.
  • Page 27 ENGLISH 12.3 Filling the detergent and The display shows the maximum load, the default temperature, the maximum additives spin speed, the indicators of the phases making up the programme and the cycle duration. 12.2 Loading the laundry 1. Open the appliance door. 2.
  • Page 28 With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid detergent than the limit shown on the flap. • Do not set the prewash phase. • Do not set the delay start function.
  • Page 29 ENGLISH Changing the delay start after To perform washing only, make sure that only the the countdown has started Lavar indicator is on above To change the delay start: the Lavar+Secar button. 1. Touch the Inicio/Pausa button to In case a selection is not pause the appliance.
  • Page 30 12.11 Cancelling a running this case, it will be not possible to guarantee the best washing results. programme About 20 minutes after the 1. Press the On/Off button to cancel the programme start, the programme and to deactivate the programme duration could appliance.
  • Page 31: Daily Use - Washing & Drying

    ENGLISH 12.13 End of the programme 3. Make sure that the drum is empty. 4. Keep the door and the detergent When the programme has finished, the dispenser slightly ajar to prevent appliance stops automatically. The mildew and odours. acoustic signals operate (if they are 5.
  • Page 32 (see the "Timed drying" on. The indicators table the "Programmes" chapter). appear on the display. The display The drying level indicator goes off also shows the maximum and the indicator comes on. recommended load for a washing Each time you tap on this button the time and drying programme (e.g.
  • Page 33: Daily Use - Drying Only

    ENGLISH 14. DAILY USE - DRYING ONLY To have a good drying by WARNING! using less energy and in a Refer to Safety chapters. shorter time, the appliance does not let you set a too This appliance is an low spin speed for the items automatic washer dryer.
  • Page 34: Fluff In The Fabrics

    1. Remove the laundry from the After drying phase, clean the appliance. drum, the seal and the inside 2. Make sure that the drum is empty. of the door with a wet cloth. 15. FLUFF IN THE FABRICS During the washing and/or drying phase,...
  • Page 35 ENGLISH washing machines. First, follow these generic rules: – powder detergents (also tablets and single-dose detergents) for all types of fabric, excluding delicate. Prefer powder detergents containing bleach for whites and laundry sanitization, – liquid detergents (also single-dose detergents) , preferably for low •...
  • Page 36 • Loading the appliance to the • Fabrics with residue of hair sprays, maximum capacity indicated for nail solvents or similar. each programmes helps to reduce • Garments with foam-rubber or energy and water consumption. materials similar to foam-rubber.
  • Page 37: Care And Cleaning

    ENGLISH 17. CARE AND CLEANING Remove any foreign objects (such as WARNING! metal clip, buttons, coins, etc) that you Refer to Safety chapters. may find in the door seal, the filters and the drum. Refer to 'Door seal with double 17.1 Periodic cleaning lip trap', 'Cleaning the drum', 'Cleaning schedule...
  • Page 38 Always follow the tub. This could generate bad odours and instructions that you find on mildew. the packaging of the To eliminate these deposits and product. hygienize the inner part of the appliance,...
  • Page 39 ENGLISH Regularly check the drain pump filter and make sure that it is clean. Clean the drain pump if: • The appliance does not drain the water. • The drum does not turn. • The appliance makes an unusual noise because of the blockage of the drain pump.
  • Page 40 Authorised Service Centre. 4. Turn the filter 180 degrees in anti- clockwise direction to open it, without removing. Let the water flow out. 10. Clean the filter under the water tap. 11. Put the filter back into the special guides by turning it clockwise.
  • Page 41 ENGLISH When you drain the water with the 3. Clean the valve filter on the back of emergency drain procedure, you must the appliance with a toothbrush. activate the drain system again: a. Put 2 litres of water in the main wash compartment of the detergent dispenser.
  • Page 42: Troubleshooting

    1. Put 2 litres of water in the main wash 3. Put the two ends of the inlet hose in compartment of the detergent a container and let the water flow out dispenser. of the hose. 2. Start the programme to drain the 4.
  • Page 43 ENGLISH • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. The appliance does For this information, contact your local water authority. not fill with water prop‐ •...
  • Page 44 Problem Possible solution • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed. • Make sure that there is no damaged fuse in the fuse box. The programme does •...
  • Page 45 ENGLISH Problem Possible solution • Increase the detergent quantity or use a different detergent. • Use special products to remove the stubborn stains before The washing results you wash the laundry. are not satisfactory. • Make sure that you set the correct temperature. •...
  • Page 46: Consumption Values

    Make sure that the water level inside the drum is not too high. If necessary, proceed with an emergency drain (refer to «Emergency drain» in «Care and cleaning» chapter). To open the door, proceed as follows: 1. Press the On/Off button to switch the appliance off.
  • Page 47 ENGLISH Remaining moisture at the end of the cycle. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture at the end of washing cycle. Values and programme duration may differ depending on different conditions (e.g.
  • Page 48: Environmental Concerns

    Programme Litres h:mm °C Algod. 2.75 3:30 1600 95°C Algod. 1.95 3:10 1600 60°C Algod. 0.36 3:00 1600 20°C Sintéticos 0.60 2:10 1200 40°C Delicados 0.35 1:10 1200 30°C Lana/Lãs 0.40 1:10 1200 30°C 1) Maximum spin speed. 2) Suitable for washing heavily soiled textiles.
  • Page 52 www.aeg.com/shop...

Table of Contents