Summary of Contents for SpeedFun FURIOUS EVO EASY+
Page 1
ISTRUZIONI USO E MONTAGGIO USE AND INSTALLATION INSTRUCTIONS NOTICE D'UTILISATION ET DE MONTAGE FURIOUS EVO EASY + Compatibilità - Compatible with Motors: - Ananda M80 BBTR Central Motor - Ananda M80 AGILE (Atala) - Nakamura M80 Display: - Compatible with all display models Data 07.09.2023 Pagina 1/7...
Page 2
Istruzioni Montaggio Mounting Instructions RIMUOVERE LA BATTERIA REMOVE THE BATTERY RETIREZ LA BATTERIE Rimuovere le viti che fissano il gruppo contatti sotto batteria Remove the screws that hold the contact assembly under the battery Retirez les vis qui fixent le groupe de contacts sous la batterie Tirare verso l’alto e spostare il gruppo contatti.
Page 3
Sotto i contatti della batteria di questo modello di ebike si nota un comodo spazio dove alloggiare il corpo del dispositivo Furious Evo ben protetto da acqua e polvere e alcune fessure necessarie per infilare i cavi e raggiungere il connettore del sensore di velocità. In altri modelli di Ebike potrebbe essere necessario rimuovere il motore dal telaio.
Page 4
IMPORTANTE - IMPORTANT A che cosa serve questo ponticello di filo blu? Leggere attentamente: Il dispositivo Furious viene fornito sempre attivo, non disattivabile. Se si desidera avere la possibilità di attivare e disattivare la funzione di sblocco di velocità è necessario tagliare/interrompere il ponticello nel punto indicato dalla freccia (isolare le due estremità!).
Istruzioni per l'uso Instructions for use Mode d'emploi INFO GENERALI Lo scopo di Furious EVO è di manipolare la velocità di rotazione della ruota posteriore e di comunicare al motore una velocità sempre inferiore ai 25 kmH in modo da ottenere una velocità reale con motore attivo molto alta. La velocità reale massima raggiungibile sarà dettata dalla potenza del motore sommata alla potenza espressa dalle proprie gambe.
Activation and Deactivation Methods: - Turn off the ebike. - Place the chain on the longest gear (the smallest rear sprocket). - Position the left pedal at 11.00. From now on, do not turn the rear wheel. - Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..). - Lift the rear wheel off the seat or frame.
Page 7
IMPORTANT Once the SpeedFun speed unlocking device has been installed, the electric bicycle, exceeding the 25 kmH limit, is compared to a moped and as such, if it circulates in public places, needs the approval / registration, is subject to payment of the road tax and insurance coverage, must have the plate, can not circulate on the bike paths and the driver has the obligation of driving with license and must use the helmet.
Need help?
Do you have a question about the FURIOUS EVO EASY+ and is the answer not in the manual?
Questions and answers