Smoke Conduit Cleaning - Ravelli RBC 8010 Use And Maintenance Manual

Rev.1 17/06/2021
Pag.40
1- Remove the vermiculite stop
2-Deep cleaning
Pulire qua

Smoke conduit cleaning

! IMPORTANT
step action
1
Open the hatches.
2 Clean the ashes, eventually use a brush or similar and reassemble everything.
Note: the hatches are equipped with gaskets, therefore, before reassembling them, make sure that the gaskets are not
worn.
Use and maintenance manual RBC 8010 - 8012
This operation must be carried out by a Ravelli Assistance Centre.
Schedule this type of cleaning with the Ravelli Assistance Centre.
The smoke conduit must be cleaned every 3 months.
Pulire qua