Paradyne 3166 Quick Reference page 8

Table 1. Port Configuration Options (1 of 2)
Option
Port Type: Port Type:
Base Rate: B R t
N t DCLB Net DCLB:
Port LB: Port LB:
All Ones: All Ones:
Rcv Yellow: Rcv Yellow:
(Received Yellow)
Tx Clock: Tx Clock:
InvertTxC: InvertTxC:
(Invert Tx Clock)
InvertData: InvertData:
EDL: EDL:
Factory 1
E530
V.35
RS449
X.21
Nx64
Nx56
Disab
V.54
FT1
Both
Disab
DTLB
DCLB
Both
Disab
DTR
RTS
Both
None
Halt
Int
Ext
Enab
Disab
Enab
Disab
Enab
Disab
Factory 2
E530
V.35
RS449
X.21
Nx64
Nx56
Disab
V.54
FT1
Both
Disab
DTLB
DCLB
Both
Disab
DTR
RTS
Both
None
Halt
Int
Ext
Enab
Disab
Enab
Disab
Enab
Disab
6
Comments/Description
Selects the port type: EIA-530A, Selects the port type: EIA-530A,
V.35, RS449, or X.21.
Enables the ort to either Nx56 or Enables the port to either Nx56 or
Nx64 rates.
Network-initiated DCLB, allows
DCLB DCLB to be controlled by inband b ll d b i b
V.54 or FT1 (ANSI) codes. ( )
Port-initiated Loopbacks, allows
Loopbacks to be initiated through L b k t b i iti t d th
y
the port by the external DTE.
All ones sent to network (DTE) T1 All ones sent to network (DTE) T1
when DTR or RTS interrupted.
Data port remains enabled, or is
disabled, on receiving Yellow on di bl d i i
network T1.
Selects whether the transmitted
data clock is internal (TXC) or d t l k i i t l (TXC)
external (XTXC).
Selects phase inversion of the Selects hase inversion of the
transmit clock (TXC).
Allows the data on the port to be Allows the data on the ort to be
inverted.
Specifies whether the Embedded S ecifies whether the Embedded
Data Link is enabled.
,
d
h
Y ll