Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nordic PSH-L0118
Summary of Contents for Nordic PSH-L0118
- Page 1 CORDLESS POLE SAW & HEDGE TRIMMER 2 IN 1 OPERATING MANUAL PSH-L0118...
-
Page 2: Product Specification
NORDIC PRODUCT SPECIFICATION Voltage: TRIMMER Rated Speed: 1,500rpm Max Cutting Length: 400mm Length Of Blade 415mm No-load Speed: 2,500rpm Chain Speed: 5 m/s Blade Length: 8” Cutting Length: 400mm GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury. -
Page 3: Personal Safety
NORDIC from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of an electric shock. • When operating a power tool outdoors, use an extension cable suitable for outdoor use. Using a cord suitable for outdoor use reduces the risk of an electric shock. - Page 4 NORDIC • Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work which needs to be done. Using a power tool in ways for which it was not intended can lead to potentially hazardous situations.
- Page 5 NORDIC • Always keep proper footing and operate the pole saw only when standing on fixed, secure and level surface. Slippery or unstable surfaces such as ladders may cause a loss of balance or control of the pole saw. •...
-
Page 6: Additional Safety Instructions For Batteries And Chargers
NORDIC ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGERS Use only batteries and chargers applicable for this machine. 4.1 BATTERIES • Never attempt to open for any reason. • Do not store in locations where the temperature may exceed 40 °C. - Page 7 NORDIC Denotes risk of personal injury or damage to the tool. Read manual before use Wear eye protection Wear ear protection Wear safety gloves In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated; Earthing wire is therefore not necessary (only for charger) Ambient temperature 40°C max.
- Page 8 NORDIC TRIMMER ASSEMBLY / USE SAW ASSEMBLY / USE...
-
Page 9: Operation
NORDIC WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for ... -
Page 10: Cutting Tips
NORDIC and keep it pressed. To switch OFF, release the lock-out button for On/Off switch and then release the On/Off switch HOLDING THE TRIMMER / SAW The unit has both a front and rear handle. With the blade directed away from you, hold the unit by both handles. -
Page 11: Maintenance
NORDIC 9.2 MAINTENANCE Our machines have been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper machine care and regular cleaning. 10. REPAIR Only use accessories and spare parts recommended by the manufacturer. - Page 12 NORDIC...
Need help?
Do you have a question about the PSH-L0118 and is the answer not in the manual?
Questions and answers
how do you exstend pole saw
instructions that come with saw are useless