Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nordic HT-B0136
Summary of Contents for Nordic HT-B0136
- Page 1 36V CORDLESS HEDGE TRIMMER OPERATING MANUAL HT-B0136...
-
Page 2: Product Specification
NORDIC PRODUCT SPECIFICATION Voltage: No-load speed: 1,500spm Blade Length: 510mm Cutting Diameter: 28mm GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury. -
Page 3: Personal Safety
NORDIC 2.3 PERSONAL SAFETY • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury. -
Page 4: Additional Safety Instructions For Batteries And Chargers
NORDIC 2.5 SERVICE Your power tool should be serviced by a qualified specialist using only standard spare parts. This will ensure that it meets the required safety standards. a) Use only the manufacturer’s recommended replacement parts and accessories. b) Inspect and maintain the machine regularly. Have the machine repaired only by an authorized repairer. - Page 5 NORDIC accidental contact with metallic objects, the battery is short circuited and an intense current will flow causing heat generation which may lead to casing rupture or fire. • Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators and other polymer components may be damaged resulting in electrolyte leakage and/or internal short circuiting leading to heat generation causing rupture or file.
-
Page 6: Operation
NORDIC In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated; Earthing wire is therefore not necessary (only for charger) Ambient temperature 40°C max. (only for battery) Do not expose charger and battery pack to water... - Page 7 NORDIC Plug the charger adapter into power source. The green light on the charger stand will illuminate, indicating the charger is powered. Slide the battery all the way into the charger stand.The red light on the charger stand will illuminate, indicating that the battery is charging.
-
Page 8: Working With The Tool
NORDIC WORKING WITH THE TOOL During the cutting process, be careful not to touch any objects such as wire fences or plant supports. This can cause damage to the safety cutter bar. If the blade is jammed by a fixed object, immediately turn off the tool and remove the battery. -
Page 9: Maintenance
NORDIC • Always keep the blade clean. Do the following after each use: Clean the blade (with an oily cloth); oil the safety cutter bar using an oil can or spray. MAINTENANCE • Before every use, check the device for obvious damage such as loose. worn or damaged parts. Check that the bolts in the safety cutter bar are tight. - Page 10 NORDIC...
- Page 11 NORDIC...
- Page 12 NORDIC...
Need help?
Do you have a question about the HT-B0136 and is the answer not in the manual?
Questions and answers