NORDIC • When operating a power tool outdoors, use an extension cable suitable for outdoor use. Using a cord suitable for outdoor use reduces the risk of an electric shock. • If operating a power tool in a damp location is unavoidable, use a power supply protected by a residual current device (RCD).
Page 4
NORDIC • Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work which needs to be done. Using a power tool in ways for which it was not intended can lead to potentially hazardous situations.
NORDIC • Be careful of the line-cutting blade, which can give deep cuts. • Do not try to stop the cutting device (nylon line) with your hands. Always let it come to a stop by itself. • CAUTION! After switching off, the nylon line will continue to rotate for a few more seconds.
Page 6
NORDIC • In case of skin or eye contact, follow the instructions below: 1. Immediately rinse with water. Neutralize with a mild acid such as lemon juice or vinegar. 2. In case of eye contact, rinse abundantly with clean water for at least 10 minutes.
NORDIC Do not expose charger and battery pack to water Use battery and charger only in closed rooms Do not incinerate battery pack or charger Danger of injury from flying parts! Keep the bystanders away from the danger zone! Protect from the rain.
Page 8
NORDIC Slide the battery all the way into the charger stand.The red light on the charger stand will illuminate, indicating that the battery is charging. The red light will go off after charging is complete and a green light will appear.
Page 9
NORDIC ADJUSTING PRODUCT LENGTH Loosen the adjustment collar. Pull the shaft out to increase the height, or push the shaft in to decrease the height. Re-tighten adjustment collar. ADJUSTING CUTTING HEAD ANGLE: The lawn trimmer is equipped with a three position adjustable working angle.
Page 10
NORDIC • Hold front handle with one hand and auxiliary handle with the other hand. • Make sure that cutting line is fed out before operation. • Do not switch the machine on with the cutting head on or near material to be cut.
NORDIC Clean out the cutting head. Insert the end of the new cutting line through the spool eyelets and put the new trimmer spool into the cutting head. Refit the cutting head cover. Pull out the end of the cutting line until they reach the outside edge of trimmer safety guard 9.2 MAINTENANCE...
Page 12
NORDIC Lock-off button Telescopic shaft Main handle Cutting head adjusting button On/off switch Safety guard Battery pack(not include) Trimmer head Auxiliary handle Edge wheels PLEASE NOTE: Battery & Charger sold seperately. Handle rotation button Telescopic shaft locking collar...
Need help?
Do you have a question about the POBA4000 and is the answer not in the manual?
Questions and answers