Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nordic GT-B0218
Summary of Contents for Nordic GT-B0218
- Page 1 18V BRUSHLESS GRASS TRIMMER OPERATING MANUAL GT-B0218...
-
Page 2: Product Specification
NORDIC PRODUCT SPECIFICATION Voltage: 18V DC No load speed: 6500rpm(String line) 7500rpm(Bush cutter) Line Trimmer Diameter: Ø300mm Brush Cutter Diameter: Ø255mm Vibration: 5.8m/s (Main Handle), K=1.5m/s 1.8m/s (Adjustable Handle), K=1.5m/s A weighted sound pressure level: LpA: 84dB(A) ; KpA=3dB(A) A weighted sound power level: LwA: 96dB(A) ;... -
Page 3: Personal Safety
NORDIC • When operating a power tool outdoors, use an extension cable suitable for outdoor use. Using a cord suitable for outdoor use reduces the risk of an electric shock. • If operating a power tool in a damp location is unavoidable, use a power supply protected by a residual current device (RCD). - Page 4 NORDIC • Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work which needs to be done. Using a power tool in ways for which it was not intended can lead to potentially hazardous situations.
-
Page 5: Additional Safety Instructions For Batteries And Chargers
NORDIC • Be careful of the line-cutting blade, which can give deep cuts. • Do not try to stop the cutting device (nylon line) with your hands. Always let it come to a stop by itself. • CAUTION! After switching off, the nylon line will continue to rotate for a few more seconds. - Page 6 NORDIC • In case of skin or eye contact, follow the instructions below: 1. Immediately rinse with water. Neutralize with a mild acid such as lemon juice or vinegar. 2. In case of eye contact, rinse abundantly with clean water for at least 10 minutes.
-
Page 7: Installing The Harness
NORDIC Do not expose charger and battery pack to water Use battery and charger only in closed rooms Do not incinerate battery pack or charger Danger of injury from flying parts! Keep the bystanders away from the danger zone! Protect from the rain. -
Page 8: Operation
NORDIC REPLACE THE METAL BLADE TO SPOOL CAUTION: NEVER use unit if blade is warped or has teeth that are chipped or missing. Replace a damaged blade immediately. CAUTION: Always wear heavy-duty work gloves when handling and installing a blade. -
Page 9: Charging The Battery
NORDIC CHARGING THE BATTERY This lithium-ion battery pack is shipped partially charged. Before using it the first time, fully charge the battery pack. A fully discharged battery pack with a temperature between 0°C and 40°C will charge in about 1 hour. -
Page 10: Trimming Around Trees
NORDIC NOTE: Even if you are careful, trimming around foundations, brick or stone walls, curves, etc., will result in above-normal string wear. To renew the wire, press the lower spool knob against the ground with rotating trimmer. TRIMMING / MOWING Swing trimmer with a sickle-like motion from side to side. -
Page 11: Maintenance
NORDIC Do not use a blade near a chain link fence, metal stakes, landscape borders or building foundations. Do not cut with dull, cracked or damaged metal blade. Before cutting growth, inspect for obstructions such as boulders, metal stakes or strands of wire from broken fences. If an obstruction can not be removed, mark its location so that you can avoid it with the blade. - Page 12 NORDIC...
Need help?
Do you have a question about the GT-B0218 and is the answer not in the manual?
Questions and answers