Kaiterra Square Deployment Manual page 8

Other things to consider:
Air is drawn into the Kaiterra Square from all sides of the device. None of the sides
●
of the device must be covered as any changes in the airflow may aect the
readings and accuracy of our devices.
In order to avoid direct breathing on a device, which would impact your air quality
●
readings, try to avoid installing air quality monitors right next to a workspace,
providing at least 3 feet 0.9 meters) of space between the device and any
workstations. If the space does not allow this, then make sure the monitor is facing
the occupants back.
Our air quality monitors were designed to be installed in an upright position. Please
●
do not install our products sideways or upsidedown, as your readings will be
impacted.
Ceiling installations are also not ideal. If you are going to proceed with a ceiling
●
installation, please keep in mind the following:
Since your ceilings are likely above the breathing zone, your devices will be
■
measuring the air that is not directly associated with the air that your tenants,
colleagues, or customers are breathing in, making your readings less accurate
according to the actual air that would impact these individuals.
Temperature and Relative Humidity readings will especially be influenced: as
■
hot air rises, the Temperature/Relative Humidity readings can be impacted by
numerous degrees/% compared to the breathing zone levels.
Building certifications, such as WELL, RESET, and LEED, may have their own
●
requirements for things such as installation height and placement.
If this installation is pursuing any of these certifications, please check their
requirements so that your air quality monitor is properly installed.
Exact room placement may vary based on the type of space, but these spaces can be
categorized into two general scenarios:
1. Enclosed Spaces
Open Spaces
2.
Kaiterra Square Air Quality Monitor Deployment Guide
7