Table of Contents
Advertisement
Figure 3. 5930-B1-192 Set Up for a 19-Inch Rack
In preparation for bracket and chassis installation, determine:
4
Whether the equipment will be rack-mounted.
Width of the rack: 19" (483 mm) or 23" (584 mm).
Whether the rack has mounting rails with threaded or non-threaded screw
holes.
The number of POTS/ISDN splitter chassis required.
NOTES:
Install chassis in the rack from the bottom up to maintain stability.
If access to the back of the unit will be inconvenient when the chassis is
mounted, connect the grounding wire before installing the chassis in the rack.
May 2005
5930-A2-GZ40-00
Advertisement
Table of Contents
