Table of Contents
Advertisement
3. Close the oven door halfway to the first
opening position. Then lift and pull to
remove the door from its seat.
4. Put the door on a soft cloth on a stable
surface and release the locking system to
remove the glass panels.
5. Turn the fasteners by 90° and remove
them from their seats.
6. First lift carefully and then remove the
glass panels one by one. Start from the
top panel.
90°
1
7. Clean the glass panels with water and
soap. Dry the glass panels carefully. Do
not clean the glass panels in the
dishwasher.
8. After cleaning, install the glass panels
and the oven door.
If the door is installed correctly, you will hear
a click when closing the latches.
Make sure that you put the glass panels ( ,
and ) back in the correct sequence. Check
for the symbol / printing on the side of the
glass panel. Each of the glass panels looks
different to make the disassembly and
assembly easier.
When installed correctly, the door trim clicks.
A
B
C
Make sure that you install the middle panel of
glass in the seats correctly.
2
A
B
C
ENGLISH
19
Advertisement
Table of Contents
