Table of Contents
Advertisement
OF3351
5
1. Neutral Switch
2. Bracket
3. Bracket Mounting Bolts
4. Notch
5. Plate
Figure 8
ADJUSTING DIRECTION
CONTROL PEDAL
(Figure 9)
1. Remove jam nut from stop bolt and
remove stop bolt from frame.
1. Control Pedal
2. Stop Bolt
3. Adjustment Nut
Figure 9
4
3
1
5
OF3360
4. Jam Nut
5. Rod End
2. Remove bolt and nut connecting rod end
to direction control pedal.
3. Turn rod end farther onto rod to angle
pedal back. Turn rod end farther off of
rod to angle pedal forward.
4. Check that pedal is in a comfortable
position. Adjust again if necessary.
5. Replace bolt and nut removed in step 2.
6. Reinstall stop bolt and turn adjustment
nut until pedal hits bolt when fully
depressed forward.
7. Reinstall jam nut on stop bolt and
tighten.
ADJUSTING PARKING BRAKE
(Figure 10)
1
To adjust parking brake:
2
2. Tighten
adjustment nuts
to eliminate slack
in cables.
3. Tighten jam nuts
against cable
bracket.
2
3
4
GB - 21
1. Loosen jam
nuts.
Figure 10
OF3341
Advertisement
Table of Contents
