Electrolux EWD746PCBI User Manual page 43

Table of Contents

Advertisement

growth inside the drum and the tub. This
could generate bad odours and mildew. To
eliminate these deposits and clean the inner
part of the appliance, run a maintenance
wash regularly (at least once a month).
Refer to "Cleaning the drum" paragraph.
16.6 Door seal with double lip trap
This appliance is designed with a self
cleaning draining system, allowing light fluff
fibers that fall off the clothes to be drained out
with the water. Regularly examine the seal.
Coins, buttons, other small items can be
recovered at the end of the cycle.
Clean it when needed, using ammonia cream
cleanser agent without scratching the seal
surface.
Always obey the instructions that you find
on the packaging of the product.
Check and remove objects (if there are any)
that could be trapped in the fold.
Make sure that no laundry remains between
the seal and the door.
Use a moist cloth to wipe off any dirt or water
residue left behind in the door seal after
completion of program cycle.
16.7 Cleaning the drum
Regularly examine the drum to prevent
unwanted deposits.
Rust deposits in the drum may occur due to
rusting foreign body in the washing or tap
water containing iron
Clean the drum with special products for
stainless steel.
Always follow the instructions that you
find on the packaging of the product.
Do not clean the drum with acidic
descaling products, scouring products
containing chlorine or iron or steel wool.
For a thorough clean:
1. Remove all laundry from the drum.
2. Run the Machine Clean programme. For
more details, refer to washing programme
table.
3. Add a small quantity of powder detergent
into the empty drum, in order to rinse out
any left residues.
16.8 Cleaning the detergent
dispenser
To prevent possible deposits of dried
detergent or clotted fabric softener and/or
formation of mould in the detergent dispenser
drawer, once in a while carry out the following
cleaning procedure:
1. Open the drawer. Press the catch
downwards as indicated in the picture
and pull it out.
2. Remove the top part of the additive
compartment to aid cleaning and flush it
out under running warm water, to remove
any traces of accumulated detergent.
After cleaning, put the top part back into
position.
ENGLISH
43

Advertisement

Table of Contents
loading

Table of Contents