Download Print this page

Quick Lens Adjustment - Barco TLD HB Installation Manual

Advertisement

3. Push the lens, motors at the top, in the lens block gap horizontally, lining up the motor connector on the lens with the connector
on the lens block (B), until the lens clicks in the lens anchor system.
Caution:
For a table mounted projector, hold the projector when pushing the lens into the lens block to avoid sliding off from
the table.
Image 1-4
Lens installation

1.4 Quick Lens Adjustment

Quick zoom/focus adjustment
1. Press the Selection key *, Barco key.
The zoom/focus menu will be displayed. (image 1-5)
2. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image.
3. When finished, press EXIT key to return or ENTER to continue to the shift adjustment.
LENS ADJUSTMENT ZOOM/FOCUS
ZOOM with
or
FOCUS with
<ENTER> to shift
<EXIT> to return
Image 1-5
Press the selection key * to switch to another pattern. Different patterns are available.
Quick shift adjustment
1. Press the Selection key *, Barco key.
The zoom/focus menu will be displayed (image 1-5).
2. Press ENTER.
The shift menu will be displayed. (image 1-6)
3. Push the cursor key ↑ or ↓ to shift the image up or down and ← or → to shift the image left or right.
4. When finished, press EXIT key to return or ENTER to continue to zoom/focus.
R5976666 TLD HB (5.0-8.0:1) LENS KIT 22/12/2004
,
or
Download from Www.Somanuals.com. All Manuals Search And Download.
1. TLD HB (5.0-8.0:1) Lens Kit
5

Advertisement

loading

This manual is also suitable for:

R9842120