LG LSCE305STE Owner's Manual page 23

To activate:
Press the ON control to activate the desired
element and press the Warm control. The selected
element is set to the LOW setting. The indicator
light above Warm turns on.
To change the power level:
Press the element's ON control and select a new
number on the element power settings. The
indicator light above Warm turns off.
Using the Warming Zone
Use the warming zone to keep cooked foods
warm, such as vegetables, gravies and oven-safe
dinner plates.
Do not use the warming zone to cook food.
Attempting to cook uncooked or cold food on the
warming zone could result in a food-borne illness
To activate the warming zone:
Press the WARMING ZONE ON control. Set the
desired power level on the element power
settings.
Warming Level Guide
Settings
1-2 Pastries, breads, breakfast foods,
eggs, delicate foods
3-5 Cream-based soups, stews,
vegetables, meats
6-8 Sauces, gravies
9 Hot beverages, soups
NOTE
• All foods should be covered with a lid or
aluminum foil to maintain food quality.
• When warming pastries and bread, the cover
should have an opening to allow moisture to
escape.
• Do not use plastic wrap to cover foods. Plastic
may melt onto the cooktop surface and be very
difficult to clean.
Used
• Use only cookware and dishes recommended as
safe for cooktop use.
• Always use potholders when removing food
from the warming zone as cookware and plates
will be hot.
• Never warm food for longer than one hour (eggs
for 30 minutes), as food quality may deteriorate.
• Do not heat cold food on the warming zone.
• The quantity and type of food being held may
affect the required heat setting
• Do not use large cookware or large amounts of
food as this may cause uneven heating.
• Always hold food at proper food temperatures.
USDA recommends food temperatures between
140 - 170 (except pastries).
8 8
Using the Bridge Elements
This feature is only available on some models.
The three left cooking zones can be used together
as a single cooking zone using the bridge function.
This allows you to cook with larger oblong pans.
The bridge function can only be activated when
the left front cooking zone and the left rear
cooking zones are OFF.
To activate the bridge element:
1
Press the Bridge control. The indicator above
the control turns on.
2
The power level indicator lights for the left
front and left rear bridge elements flash.
Select the desired power level.
To adjust the power level:
1
Select ON or Bridge for one of the left
elements.
OPERATION 23