Table of Contents
Advertisement
About this Manual
Products Covered by this Manual
Manual Organization
This reference guide for the 2000 Series describes IAD features and
specifications, configuration, and cabling. This manual is designed to be used
as a reference regarding commands, interface ports, configuration parameters,
and other information specific to your IAD.
ADSL: 2004, 2004s, 2008, 2008s
SHDSL: 2104, 2104s, 2108, 2108s, 2112s, 2116s, 2124s
T1/E1: 2208, 2208s, 2216s, 2224s
SDSL: 2304, 2304s, 2308, 2308s, 2316s, 2324s
The chapters and appendices in this manual are arranged for quick reference
when you need it. We recommend that you first read the Quick Start Guide
and then refer to the remaining chapters for more detailed information.
Appendices are designed to complement the main chapters.
•
Chapter 1, "Introduction" – introduces the features of the 2000 Series IADs,
including the hardware, indicators, and ports.
•
Chapter 2, "Quick Start Guide" – describes the process of getting an IAD up
and running in a typical customer premises. This chapter is helpful if you're
new to 2000 Series products, because it lists each step, beginning with
unpacking the IAD. It also provides information about logging on, using the
menu interface, setting the IP address, basic configuration tasks, and
restarting the IAD. The subsequent chapters provide more detailed
information.
•
Chapter 3, "Administration" – provides information about security,
configuring Simple Network Management Protocol (SNMP), upgrading
ACOS, system utilities, and other topics.
•
Chapter 4, "Configuration" – details how to configure the 2000 Series for
physical connection to the network (T1/E1 and SDSL, frame relay and ATM,
P
REFACE
P r e f a c e
xxiii
Advertisement
Table of Contents
Troubleshooting
