Hyundai KN Series Manual page 8

DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE APPLICABLE
MODULE(S), NOR FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES, HOWSOEVER CAUSED. LOSS OF USE, LOSS OF PROFITS, LOSS OF
PRODUCTION AND LOSS OF REVENUES ARE SPECIFICALLY EXCLUDED.
_________________________________________________________________________
*"Nominal Power" is the power in watt peak that a MODULE generates in its maximum power point.
**"STC(Standard Test Conditions)"is as follows: (a) light spectrum of AM 1.5, (b) an irradiation of 1,000
W/m 2 and (c) a cell temperature of 25 ℃. The measurements must be carried out at HYUNDAI or an
independent test institute agreed to by HYUNDAI in advance, in accordance with IEC60904 as tested at the
junction box connectors per the calibration and testing standards of HYUNDAI. These measurements will be
considered valid at the production date of the MODULES with an equipment tolerance of ±3%. HYUNDAI's
calibration standards shall be in compliance with the standards applied by international institutions accredited
for this purpose.
Headquarter
HYUNDAI ENERGY SOLUTIONS Co., Ltd.
Bundang First Tower, 55, Bundang-ro,
Bundang-gu, Seongnam-si,
Gyeonggo-do 13591, Korea
Tel. +82-31-8006-6913
https://www.hyundai-es.co.kr/
info@hyundai-es.co.kr
www.hyundai-es.co.kr
Factory
Tongwei Solar(Hefei) Co., Ltd.
No.888 Changning Road, High-tech
Destrict, Hefei, P.R. China
Tel. +86-028-6279-6666
http://www.tw-solar.com/en/
DUWW@tongwei.com
Importer in Australia
Trading Name: Metal Manufactures
Head Distribution Centre:
19-21 Loyalty Rd, North Rocks, NEW SOUTH
WALES, 2151 Australia
Tel. 0412-500-769
https://www.mmem.com.au/
rupert.blatch@mmem.com.au