Advertisement
setting up your refrigerator
INSTALLING THE REFRIGERATOR
• W hen it is installed on carpet or floor, put a firm backing board on it to prevent the
ground from discoloring when heated. Don't use the bearing plate provided by us for
delivery directly as a backing board.
If it is installed at an uneven place, it will lead to shake and noise and shorten its service life.
• A djust front of the Refrigerator to keep it a little bit higher than the rear part.
Shake the Refrigerator from front to back, left and right and across corners to check if it is
firm; adjust leveling legs of the front part again to keep it a little bit higher than the rear.
If the front is lower, the Refrigerator doors may not be closed, its performance may be badly
affected, and some frost may be formed.
3.Adjust parallelism
If doors descend after the Refrigerator is installed and stored with foods, please adjust
parallelism of doors according to drawings 4~5 days after installation.
4. Clean, install accessories and connect power
Remove the dust accumulated on the Refrigerator while transporting.
Refer to the following instruction of the manual for installation of relevant accessories.
To prevent damage during transporting, some accessories are packed together.
Insert power plug to 220V socket. Don't share a socket with other equipment.
10_ setting up
Advertisement
