Page 1
DAILY REFERENCE GUIDE THANK YOU FOR BUYING A HOTPOINT PRODUCT. In order to receive a more complete assistance, please PLEASE SCAN THE QR CODE ON YOUR register your appliance on: APPLIANCE IN ORDER TO HAVE MORE www.hotpoint.eu/register DETAILED INFORMATION Before using the appliance carefully read the Safety Instruction.
Page 2
FIRST TIME USE SALT, RINSE AID AND DETERGENT ADVICE REGARDING THE FIRST TIME USE FILLING THE RINSE AID DISPENSER After installation, remove the stoppers from the racks and the retaining Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be filled when the RINSE AID REFILL indicator light in the control elastic elements from the upper rack.
PROGRAMS TABLE Duration of wash Water Energy Program Available options program consumption consumption (h:min) (litres/cycle) (kWh/cycle) 1. Eco 50° 4:00 11.5 0.78 2. Intensive 65° 2:30 15.0 1.50 3. Mixed 55° 2:25 15.0 1.35 4. Delicates 45° 1:30 11.0 1.00 5.
Page 4
OPTIONS AND FUNCTIONS OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times. The option will not be enabled. TABLET (Tab) DELAY This setting allows you to optimize the performance of the...
LOADING THE RACKS UPPER RACK LOWER RACK Load delicate and light dishes: glasses, cups, For pots, lids, plates, salad bowls, cutlery saucers, low salad bowls. etc... Large plates and lids should ideally be placed at the sides to avoid interferences with the spray arm.
DAILY USE The machine will switch off automatically during certain extended 1. CHECK WATER CONNECTION periods of inactivity, in order to minimise electricity consumption. Check that the dishwasher is connected to the water supply If the crockery is only lightly soiled or if it has been rinsed with and that the tap is open.
CARE AND MAINTENANCE CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS Regularly clean the filter assembly so that the filters do not clog and that On occasions, food residue may become encrusted onto the spray arms the waste water flows away correctly. and block the holes used to spray the water.
• Using QR code on your product. • Visiting our website docs.hotpoint.eu and parts-selfservice.whirlpool.com • Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please state the codes provided on your product‘s identification IEC 436 plate.